Type-10/25/100-L
7Pages

Simplex inline filtersType-10/25/100-L Filters for inline installation Wide application Optimised flow characteristics Low pressure drop Special high efficient Filter media

Performance characteristic curves AP-Q-characteristic curves for complete filter Application Filtering hydraulic fluids, lubricating oils and liquids. Suitable for assembly into pipelines. Design The filter housings are of a welded steel construction with opposite inlet and outlet connections. The filter top cover is provided with vent arrangement while the housing is provided with drain arrangement. The filters are mounted either with two angle plates or on legs. Filter Element Pleated design with optimal pleat density and in various filter materials. Further detailed information can be...

Ordering Information Special design available on request. Filter Assembly Seal Kit- Filter Type Maintenance indicator O without A..Visual Mechanical B..Visual-Electrical D..Visulal-Electrical with lamp G..DP Gauge S.. DPswitch X.. DP Gauge+Switch Switch Pressure Port Connections F..Sq Flange D..DINFIange S..SAE Flange Port positions O. Inline-inlet & outlet in same line Nominal Size Filter Media & Filtration Grade Diff. Pressure Element Model Bypass Valve Addl. info Filter Element 1. Both sides open O-ring sealing Nominal filtration grade in pm G= stainless steel wire mesh, cleanable G10...

Note : Technical specifications are subject to change.

FilterAssembly and Initial Operation Check the system maximum pressure against the pressure on the name plate. Screw the filter to the mounting support at the fixing angles and flanges, depending on the type. Make sure the flow direction lines up with the arrows and take into account the removal space of the element both towards the top and the bottom. When the blanking plugs have been removed, install filter into the pipeline stress-free. Initial operation Ensure that the inlet and outlet connections of the filter are properly connected to the system. During start-up and filling of filter...

Disposal Guidelines - Filters Disposal Before the filter is sent for disposal or recycling, it should always be de-pressurised completely. It is suggested that the filter is dismantled and the components disposed of as industrial waste. Fluid residues are to be drained completely before disposal / recycle of the accumulator. Filter Elements - Oil from the used filter elements is to be drained before the element is sent for disposal or recycling. Decontaminate if needed and in accordance with local regulations. Environmental Protection Careless disposal of the product and/or residual fluid...