40/160-LE/LEN

Product catalog summary

Specifications:
The document specifies a Simplex Inline filter with maximum pressures of 40 bar [580 psi] and 160 bar [2321 psi]. Test pressures are 1.43 times PS for CE/PED and 1.3 times PS for ASME. The temperature range is -20°C to +100°C (-4°F to +212°F). Flow capacity varies, with a maximum of 450 lpm [100 gpm]. The filter bowl is carbon steel, and the head is aluminium alloy. Seals are available in Nitrile, Viton, and EPDM, with the bowl painted in RAL-5010.

Design and Construction:
The filter is designed for direct pipeline installation, protecting downstream components. It features a simplex design with opposite side inlet and outlet. The filter element is from the LE or LEN Series. The head includes an element locating spigot, and the bowl is mounted below for easy maintenance.

Features and Accessories:
Includes an optical indicator with an electrical option, a drain valve, and a vent valve for air removal and depressurization. A maintenance indicator monitors contamination. A bypass valve protects during start-up and over-pressurization. Media options include non-woven, inorganic glass fibre, aquasorb, paper, and SS wire mesh.

Installation and Maintenance:
Installation involves checking for damage, verifying type, and ensuring correct flow direction. The filter should be mounted vertically with the bowl at the bottom. Maintenance includes monitoring the indicator, replacing or cleaning the filter element, and proper disposal of used elements and fluids. Specified torque values and proper electrical connections are emphasized.

Performance and Safety:
Performance curves for flow rate versus pressure drop are included. A safety relief valve is recommended to protect against pressure surges. Filter elements are pressure holding equipment per the Pressure Equipment Directive 2014/68/EU but are exempt if not classified higher than category I.

Catalog excerpts

Design Max. Pressure (PS) Test Pressure (PT) Temperature range Connection Element design Bowl Seals Paint Low / Medium Pressure Filter Inline mounting \€P€\Filters. AccumulatorsTechnical Data Simplex Inline 40 bar [580 psi] 160 bar [2321 psi]. 1.43 x PS (as per CE/PED) 1.3 x PS (as per ASME) -20°C to +100°C (Standard) -4°F to +212°F (Standard) Upto G1-1/2" / SAE-24 LE Series - EPE standard LEN Series - As per DIN-24550 Material of Construction Head : Aluminium Alloy. Carbon Steel. Nitrile / Viton / EPDM. Bowl Externally painted in RAL-5010. Others on request. Hydraulic Symbol Filter Element The Filter Element is of star-pleated design with optimised pleat density for providing prolonged life. The filter element is of Out-to-In design and the contaminant is retained outside the filter element and collected in the filter bowl. The elements are available in various media options and selected based on the required oil cleanliness, initial pressure drop and dirt holding capabilities. Media options for the filter element include SS Wire Mesh - Cleanable, Nominal filtration. Paper - Non-cleanable, Nominal filtration. Non-woven - Non-cleanable, Nominal filtration. Inorganic glass fibre - Non-cleanable, Absolute filtration acc. to ISO-16889. Aquasorb - Water absorbing media, Non-cleanable. For special applications / fluids the filter elements are supplied with SS hardware (end caps & inner tube) and / or different adhesives. Technical specifications subject to change.

Open the catalog to page 1

* Before ordering, check for availability. <"’ Magnets kept loose under the elements.

Open the catalog to page 2

* Before ordering, check for availability Ordering Code - Seal Kit Ordering Code - Filter Element

Open the catalog to page 3

Installation Before installation, conduct a visual check to ensure that the filter has not suffered any damage during shipping / handling. Verify that the requested type matches with what stamped on the nameplate. Verify operating pressure with name plate information. During assembly of the filter the tightening torques (refer page 4), the flow direction (direction arrows on the filter head) and the required service height (A3 in fig.1) of the filter element are to be taken into consideration. Mount the filter assembly using the mounting holes on the filter head (C4) considering the flow direction....

Open the catalog to page 7

Oil Viscosity : 30 mm2/s [143 SUS] Specific gravity < 0.9 kg/dm3 Recommended initial Pressure Drop (AP) for assembly = 0.8 bar [11.6 psid]

Open the catalog to page 8

All EPE Process Filters & Accumulators Pvt. Ltd. catalogs and technical brochures

Type-TLF
5 Pages
250/450-FE/FEN
8 Pages
Type-10/25/100-L
7 Pages
160-OFM20X
8 Pages