High Pressure Filter Manifold mounting Type : 250/450-FE/FEN Design Max. Pressure (PS) Test Pressure (PT) Temperature range Connection Element design Technical Data Simplex Manifold mounting 250 bar [3625 psi] 450 bar [6525 psi]. 1.43 x PS (as per CE/PED) 1.3 x PS (as per ASME) -20°C to +100°C (Standard) -4°F to +212°F (Standard) Upto DN50 FE Series - EPE standard FEN Series - As per DIN-24550 Material of Construction Bowl : Carbon Steel. Seals : Nitrile / Viton / EPDM. Paint : Bowl Externally painted in RAL-5010. Filter Element The 250/450-FE/FEN series Filters are used for direct manifold mounting avoiding piping and provide wear protection of downstream components & systems. The filter inlet & outlet are on the same plane and located one above the other with inlet on the top. The flow path arrows (inlet and outlet) are marked on filter head. The Filter head is provided with an element locating spigot. The Filter bowl is mounted below the filter head and is unscrewed for maintenance. Accessories Maintenance indicator - for monitoring the filter element contamination status. Available in various designs including • Optical (pop-up version) with Electrical option. • Optical (dual dial version) with Electrical option. • Optical-Electrical with 2 switching points. Magnet - to protect the filter from ferrous contamination. Drain valve - for draining the filter during servicing. The Filter Element is of star-pleated design with optimised pleat density for providing prolonged life. The filter element is of Out-to-In design and the contaminant is retained outside the filter element and collected in the filter bowl. The elements are available in various media options and selected based on the required oil cleanliness, initial pressure drop and dirt holding capabilities. Media options for the filter element include SS Wire Mesh - Cleanable, Nominal filtration. Paper - Non-cleanable, Nominal filtration. Non-woven - Non-cleanable, Nominal filtration. Inorganic glass fibre - Non-cleanable, Absolute filtration acc. to ISO-16889. Aquasorb - Water absorbing media, Non-cleanable. For special applications / fluids the filter elements are supplied with SS hardware (end caps & inner tube) and / or different adhesives. Technical specifications subject to change.

* Before ordering, check for availability. <"’ Magnets kept loose under the elements.

* Before ordering, check for availability Ordering Code - Seal Kit Ordering Code - Filter Element

T = Optical/Electrical with 3 LEDs & 2 Switching points xx - preset differential pressure (bar)

11 = Weight including standard filter element and maintenance indicator 2) = Servicing height for filter element replacement

Spare Parts List

Installation Before installation, conduct a visual check to ensure that the filter has not suffered any damage during shipping / handling. Verify that the requested type matches with what stamped on the nameplate. Verify operating pressure with name plate information. During assembly of the filter the flow direction (direction arrows on the filter head) and the required service height (A3 in fig. 1) of the filter element are to be taken into consideration. Mount the filter assembly using the mounting holes on the filter head (C3) considering the flow direction. Failure to observe flow direction...

Performance Curves (Flow rate Vs Pressure Drop) Oil Viscosity : 30 mm2/s [142 SUS] Specific gravity < 0.9 kg/dm3 Recommended initial Pressure Drop (ΔP) for assembly = 1.5 bar [21.7 psid] EPE Process Filters & Accumulators Pvt. Ltd., Techni Towers, C-54/A, APIE, Balanagar, Hyderabad - 500 037, Telangana, INDIA Ph : +91 40 23778803 | Fax : +91 40 23871447 | [email protected] | www.epe-india.com