Introduction
The J series electric three-wheel forklift is designed for versatility and compact operation, featuring high stability and economic operation due to minimized maintenance costs. It is equipped with a fully enclosed chassis, three independent braking systems, and a comprehensive control panel.

Specifications

• Models: CPDS13JC1, CPDS13JD1, CPDS15JC1, CPDS15JD1, CPDS16JC1, CPDS16JD1, CPDS18JC1, CPDS18JD1, CPDS20JC1, CPDS20JD1
• Rated Capacity: 2900 to 4400 lb (1300 to 2000 kg)
• Load Center: 20 inches (500 mm)
• Lift Height: 118 inches (3000 mm)
• Fork Size: 1.57×3.94×36.2 inches (40×100×920 mm)
• Tilting Angle: 6.5 degrees front/rear

Dimensions

• Overall Length: 71 to 79 inches (1792 to 2012 mm)
• Width: 42 inches (1060 mm)
• Height (Mast Lowered): 79 to 81 inches (1995 to 2055 mm)
• Turning Radius: 57 to 65 inches (1440 to 1658 mm)

Performance

• Travel Speed (Laden/Unladen): 8.7 mph (14 km/h)
• Lifting Speed (Laden/Unladen): 11.8 to 9.8 inches/s (300 to 250 mm/s)
• Gradeability (Laden/Unladen): 20% to 15%

Chassis & Hydraulics
The forklift features a fully enclosed chassis protecting drive motors and hydraulic components. It includes regenerative, hydraulic wet disc, and toggle-type parking brakes.

Motor & Battery

• Driven Motor: 6.2 hp × 2 (4.6 kW × 2)
• Pump Motor: 11.5 hp (8.6 kW)
• Battery: 48V/400-600 Ah

Controller & Drive System
The forklift uses a MOSFET controller and an AC drive system, manufactured by Curtis Danaher, with an operating pressure of 14.5 Mpa for attachments.

Additional Features
The forklift includes a wide mast, low scuttle, high seating position for excellent visibility, and an integral full-vision side-shift. It incorporates ZF® components for low noise and high quality, with more than thirty adjustable performance parameters.