DJET
1 / 2Pages

DJET Ø10mm Pushbutton Recommended for outdoor applications, military and avionics equipment, telecommunications, medical equipment, power supplies. The professional toggle and pushbutton switches are available in one or two pole version. The switches can be IP 65 with fitted silicone cap or IP 67 with fitted silicone cap. Toggle and pushbuttons switches of the DJET series are available in two sizes and fit in to front panel mounting hole of 10 mm dia. MOUNTING The switches are mounted by pushing them through the mounting hole in the front panel. They are fixed with a fixing nut. Switching system Positive snap-action MATERIAL Material of contact Gold contacts: Gold/gold plated brass contacts Silver contacts: Solid silver/silver-plated contacts MECHANICAL CHARACTERISTICS Front panel thickness Min. 1.2 mm Terminals Gold contacts: Gold plated brass Silver contacts: Silver plated brass Tightening torque Rear nut 125 Ncm Do not tighten by means of top nut! ELECTRICAL CHARACTERISTICS Operating voltage/-current 10 V, 50 mA minimum (silver contacts) 10 mV, 100 μA (gold contacts) Isolation resistance >100 000 MΩ at 500 VDC Contact resistance <10 mΩ Electrical life 100 000 operations Switch rating Resistive circuit Voltage 220 VAC 110 VAC 48 VDC 24 VDC 12 VDC Current 1.5 A 2.5 A 1A 2.25 A 4.5 A Inductive circuit 50 % of above values Electric strength 1000 Vrms, 50 Hz between terminals on the same pole 2000 Vrms, 50 Hz between all terminals connected together and ground 2000 Vrms, 50 Hz between terminals of adjacent poles ENVIRONMENTAL CONDITIONS Storage temperature -40 °C ... +85 °C Operating temperature -40 °C ... +85 °C Protection degree IP 67 (sealed 10 mm dia. version only) IP 65 with protective cap Shock resistance 100 g, as per IEC 60512-4 Resistance to vibrations 10 g, 10 ... 2000 Hz, 10 cycles, as per IEC 60512-4 Damp heat 56 days (Gold contact versions only)

DJET Ø10mm Pushbutton STANDARD PART NUMBERS Metal chrome Pushbutton Ø10mm IP67 Front sealing Metal mat-black Metal Mat-chrome Contact matérial Drawing dimensions Gold (Au) Metal chrome Metal mat-black Switching action: Maintained initial position and in momentary actuation Soldering terminals C= changeover DRAWING DIMENSION Front ring Swiching action Contact us at : Email : contact@eozonline.com site: www.eozonline.com EOZ reserves the right to make changes without prior notice