EOLS-GET-26-DE Series
14Pages

OLT for IEEE 802.3ah-2004 PX-20++ Single Fiber Bi-Directional Transceiver 1.25Gbps Downstream and 1.25Gbps Upstream RoHS6 Compliant Features ♦ ♦ ♦ ♦ ♦ ♦ ♦ ♦ ♦ Hot-Pluggable SFP Package with SC connector 1.25Gbps, 1310nm BM APD Receiver 1.25Gbps, 1490nm DFB Transmitter Compliant With IEEE 802.3ah-2004 Compliant with SFP MSA Specification * \ Compliant with Digital Diagnostic Monitor Interface Support GEPON OLT extended reach application Digital Receiving Signal Strength Indication(RSSI) Operating Case Temperature Ordering information Part No. Eoptolink Technology Inc., Ltd. Page 1 of 14

eoptolinkRegulatory Compliance* Product Certificate *The above certificate number updated to June 2014, because some certificate will be updated every year, such as FCC, FDA and ROHS. For the latest certification information, please check with Eoptolink. Product Description T transceiver module is designed for Passive Optical 5Gbps upstream. It is fully compliant with IEEE Eoptolink’s high performance EPON OL Network application, 1.25Gbps downstres 802.3ah-2004. The EPON OLT transceiver is packag digital diagnostic monitoring functio of small form factor pluggable with SC connector. The...

eoptolink Operating Temperature Eoptolink Technology Inc., Ltd. Page 3 of 14

PON Series Hysteresis (Minimum) LOS/Hysteresis (Typical) Received Optical Power Level [dBm] LOSS De-Assert Level Note3: Filtered, Measured with PRBS27-1 test pattern @1.25Gbps. Note4: Measured with a PRBS 27-1 test pattern @1.25Gbps, BER 1X10-12. Note5: Eye pattern mask Note6: LOS Hysteresis Real Time Diagnostic Vendor Specific Vendor Specific (8 bytes) User Writable Vendor Specific (8 bytes) Eoptolink Technology Inc., Ltd. Page 4 of 14 V1.d 255

Bias Current EEPROM Serial ID Memory Contents Data Addr Eoptolink Technology Inc., Ltd. Page 5 of 14

Fiber Channel speed Code for high speed serial Rate Identifier Type of rate select functionality Link length supported for single mode fiber, units of km encoding algorithm Nominal signalling rate, units of 100MBd. Link length supported for single mode fiber, units of 100 m Link length supported for 50 um Link length supported for 62.5 Link length supported for copper, units of meters Link length supported for 50 um Vendor name Vendor name (ASCII) SFP vendor IEEE company ID Part number provided by vendor (ASCII) 43 Eoptolink Technology Inc., Ltd. Page 6 of 14

Eoptolink Technology Inc., Ltd. Page 7 of 14

Date code Type of diagnostic monitorir implemer Vendor’s manufacturing date code Eoptolink Technology Inc., Ltd. Page 8 of 14

Eoptolink Technology Inc., Ltd. Page 9 of 14

Calibration constants for External Calibration Option Polynomial Fit Coefficient of Order 4 for Rx Optical Power Calibartion. Polynomial Coeffici ent of Ord< for Rx Optical Pow Calibartion. PolynFit Icient of Order 3 for Rx Optical Power alibartion. Polynomial Fit Coefficient of Order 3 for Rx Optical Power Calibartion. Polynomial Fit Coefficient of Order 3 for Rx Optical Power Calibartion. Slope of Laser Bias Current Linear Calibartion Offset of Laser Bias Current Linear Calibartion Slope of Transmitter Coupled Output Power Linear Calibartion Tx_PWR(Offset) Offset of Transmitter Eoptolink...

er 8 bits of the sum of the contents of all the bytes from byte 0 to byte 94 ions of electrical interface and mounting studs. Functions are Note 8: The check code shall be the lo inclusive. SFP Pin Functi Below figure shows the described in the following Eoptolink Technology Inc., Ltd. Page 11 of 14

Recommend Circuit Schematic V1.d Eoptolink Technology Inc., Ltd. Page 12 of 14

eoptolinkMechanical Specifications Obtaining Document You can visit our website: http://www.eoptolink.com Or contact Eoptolink Technology Inc., Ltd. Listed at the end of the documentation to get the latest documents. Eoptolink Technology Inc., Ltd. Page 13 of 14

PON Series Notice: Eoptolink reserves the right to make changes to or discontinue any optical link product or service identified in this publication, without notice, in order to improve design and/or performance. Applications that are described herein for any of the optical link products are for illustrative purposes only. Eoptolink makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Contact: Add: Floor 5 Building 2 No. 21 Gaopeng Avenue High-Tech District CHENGDU, SICHUAN 610041 P.R. CHINA Tel: (+86)...