Conform to: E.M.C. Directive 89/336/CEE L.V. Directive 73/23/CEE Reference standard: EN267 TECHNICAL AND FUNCTIONAL CHARACTERISTICS CONSTRUCTION CHARACTERISTICS The burner consists of: • 7-pole outlet for burner electrical and • Combustion air intake with air flow thermostat connections. adjustment device. • Electrical protection rating IP40. • Sliding boiler coupling flange to adapt the • Sound-proof plastic protective cover head protrusion to the various types of (except the W version). boilers. • Device made from sound-absorbing material to reduce fan noise. • Gear pump with pressure regulator and fuel stop-cock valves. • Automatic control and command equipment for the burner compliant with European standard EN230. • Flame detection by photoresistance. Electrical supply Single-stage light oil burners • Single stage operation (on/off). with specific components: flexible hoses, • Abilaity to obtain optimal combustion line filter and pump. values by regulating combustion air and • Equipped with one 7-pole connector, one blast-pipe. flange and one insulating seal for boiler • Maintenance facilitated by the fact that fastening, 2 flexible hoses, one line filter the atomisation unit can be removed and one nozzle. without having to remove the burner from • On request: blast-pipe with greater than the boiler. standard protrusion, a device for air gate • Manual air flow adjustment. closure during pause to avoid loss of heat • When using biodiesel light oil (fuel of up flue, biodiesel running. vegetable origin), the burner must be built Accessories available on request 97980054 Soundproof burner cover (see page 247) Optionals Description 500 mm long combustion head Automatic Air Closure Device Biodiesel operation (5) Light oil burner accessories Line filter - Flex hoses - Nozzle - Boiler coupling kit - 7 pin plug Notes 3) Soundproof lid on burner air intake. 5) Biodiesel according to european norm EN14213-FAME. Net calorific value of light oil: Hi = 42,70 MJ/kg = 10200 kcal/kg.