Conform to: E.M.C. Directive 89/336/CEE L.V. Directive 73/23/CEE CONSTRUCTION CHARACTERISTICS The burner consists of: • Combustion air intake with air flow adjustment device. • Boiler coupling flange with hinge to facilitate dismantling of the atomising unit and deflector disk. • Air pressure switch to ensure the presence of combustion air. • Electric servomotor with mechanical cam for simultaneous regulation of combustion air and fuel. • Gear pump with pressure regulator. • Atomisation unit with magnet to control the outlet/nozzle return pins. • Automatic control and command equipment for the burner compliant with European standard EN230. Max visc. °E at 20°C Electrical supply • Flame detection by photoresistance. • On-board control panel comprising stop/go switch, automatic/manual and minimum/ maximum selector, fuel change switch and operation, block. • Terminal block for the electrical and thermostatic connections to the burner and to control the second stage of working or for the connection of the electronic output regolator. • Electrical protection rating IP40. To complete the burner GI 1000 DSPG Nozzle with 1-3 ratio (see page 229). Two-stage progressive/modulating light oil burner TECHNICAL AND FUNCTIONAL CHARACTERISTICS • Two-stage progressive output operation. for first and second stage by means of • Continuous modulation operation by electric servomotor with pause closure installing P.I.D. controller on control panel of gate to prevent any heat dispersion to (to be ordered separately with modulating flue. kit). • Equipped with one insulating seal for • Ability to obtain optimal combustion boiler fastening, 2 flexible hoses and values by regulating combustion air and one line filter; nozzle not included, to blast-pipe. be ordered separately depending on the • Maintenance facilitated by the fact that required flow. the atomisation unit can be removed without having to remove the burner from the boiler. • Minimum and maximum air flow regulation Modulating mode Part.no 98000055 Modulation kit (see page 228). Modulating probe kit (see page 228) Optionals Description Light oil burner accessories Line filter - Flex hoses - Boiler coupling kit Notes 4) Equipped with air closure device. Net calorific value of light oil: Hi = 42,70 MJ/kg = 10200 kcal/kg. 5) Biodiesel according to european norm EN14213-FAME. Net calorific value of light oil: Hi = 42,70 MJ/kg = 10200 kcal/kg.