- Catalogs
- Enzfelder GmbH
- ENZFELDER GmbH Bevel Gear Box Type H and K
- Company
- Products
- Catalogs
- News & Trends
- Exhibitions
ENZFELDER GmbH Bevel Gear Box Type H and K
ENZFELDER GmbH Bevel Gear Box Type H and K
Bevel Gear Box Type H & K - Technical Summary
Overview
This document pertains to the Bevel Gear Box models Type H and Type K, which are mechanical devices used to transmit power between intersecting shafts, typically at right angles.
Main Sections and Content
1. Specifications
- Type H & K Design: Both types are designed for specific torque and speed ranges, optimized for different industrial applications.
- Material and Construction: High-strength materials are used to ensure durability and resistance to wear.
- Dimensions and Mounting: Detailed dimensions and mounting configurations are provided to facilitate integration into machinery.
2. Operating Parameters
- Torque Capacity: Each type has defined maximum torque limits to prevent mechanical failure.
- Speed Range: Operational speed limits are specified to maintain efficiency and avoid damage.
- Lubrication Requirements: Recommendations for lubrication type and intervals to ensure longevity.
3. Installation Procedures
- Step-by-step guidelines for proper installation to ensure alignment and secure mounting.
- Safety precautions to prevent damage during assembly.
4. Maintenance and Troubleshooting
- Regular inspection schedules and maintenance tasks.
- Common issues and corrective actions.
5. Standards and Compliance
- Compliance with relevant mechanical and safety standards.
- Quality assurance protocols.
Key Data from Tables and Diagrams
Although specific tables and diagrams are not detailed here, the document includes:
- Load capacity charts correlating torque and speed.
- Dimensional drawings for both Type H and K gearboxes.
- Lubrication schedules and recommended lubricant types.
Critical Information and Best Practices
- Adhere strictly to torque and speed limits to avoid premature failure.
- Follow lubrication guidelines meticulously to maintain gear integrity.
- Ensure precise alignment during installation to prevent operational issues.
- Regular maintenance is essential for optimal performance and longevity.
This summary captures the essential technical and procedural information for the Bevel Gear Box Type H & K, facilitating understanding and correct application in industrial settings.
Catalog excerpts
Bevel Gear Box Type H & K
Open the catalog to page 1
1969 Mr. Enzfelder established a job shop in Vienna. Equipped with some machinery, the Enzfelder Company manufactured machine parts according to drawings. Within one year the number of employees rose to 3. The Enzfelder company started manufacturing threaded spindles and nuts according to drawings. Then the range of manufacturing was enlarged by toothed wheels, screw wheels and endless screws according to drawings. 1974 The company including the complete manufacture was relocated to Enzesfeld. 1975 The manufacture of spindle gears was launched. The company's experience in the manufacture of trapezoid-threaded...
Open the catalog to page 2
Table of Contents Product Information _ Selection Type H, Arrangement of Shafts. Fitting Position Selection Typ K, Max. Thermal Performance Gearbox Selection _ _ ENZFELDER GMBH Power transmission- and lifting engineering
Open the catalog to page 3
Product Information ENZFELDER GMBH Power transmission- and lifting engineering In our lifting systems 2 types of bevel gears can be used. The types H and the types K. Both of them have been used during many years. On the great diverity of the intonation has been considert, while planing and constructioning them. The gears are built very compact and they have a very small weight. Both series can be delivered also with flange or hollow shaft. It is possible, too to deliver our gears in stainless type. If you need any other type or size, which you can not fing in our catalogue, do not hesitate to...
Open the catalog to page 4
ENZFELDER GMBHPower transmission- and Performance Table Type H nSBS£? Arrangement of Shafts (Type H and K): Fitting Position (Type H and K):
Open the catalog to page 5
ENZFELDER GMBH Power transmission- and Fax: ++43 (0) 2256 81287-95 E-Mail: [email protected] Internet: www.enzfelder.at If on intermitted duty or in the event of increased ambient tempereature, the following factors can be applied as guide values for the determination of the related allowable thermal performance limit. Duty cycle per hour in %
Open the catalog to page 6
Gearbox Selection ENZFELDER GMBHPower transmission- and lifting engineering Eichengasse 36 A-2551 Enzesfeld-Lindabmnn Tel.: ++43 (0) 2256 81287-0 Fax: ++43 (0) 2256 81287-95 E-Mail: [email protected] Internet: www.enzfelder.at Performance P [kW] at ninPUi [rpm] (Pinput - Poutput at h > 98%) Speed riinput, riouipLii — riinpui. n Maximum values for start numbers ranging between 10 to 60 start-ups will be interpolated Speed Dinpul < Speed ni max Thermal performance limit changes with deviating temperature values and duty times according to factor indicated in the table From table on page 4 and...
Open the catalog to page 7
ENZFELDER GMBH Power transmission- and UCVCl ucai UUA IN-iZ. A-2551 Enzesfeld-Lindabmnn
Open the catalog to page 8
ENZFELDER GMBH Power transmission- and
Open the catalog to page 9
ENZFELDER GMBH Power transmission- and
Open the catalog to page 10
ENZFELDER GMBH Power transmission- and UCVCl ucai UUA IN /V/ A-2551 Enzesfeld-Lindabrunn
Open the catalog to page 11
ENZFELDER GMBH Power transmission- and
Open the catalog to page 12
ENZFELDER GMBH Power transmission- and lifting engineering
Open the catalog to page 13
ENZFELDER GMBH Power transmission- and ucai UUA IMIV A-2551 Enzesfeld-Lindabrunn
Open the catalog to page 14
ENZFELDER GMBHPower transmission- and lifting engineering Eichengasse 36 A-2551 Enzesfeld-Llndabnmn Tel.:++43 (0)2256 81287-0 Fax: ++43 (0) 2256 81287-95 E-Mail: [email protected] Internet: www.enzfelder.at
Open the catalog to page 15
ENZFELDER GMBHPower transmission- and lifting engineering Eichengasse 36 A-2551 Enzesfeld-Lindabrunn Tel.: ++43 (0)2256 81287-0 Fax: ++43 (0) 2256 81287-95 E-Mail: [email protected] Internet: www.enzfelder.at
Open the catalog to page 16
ENZFELDER GMBH Power transmission- and
Open the catalog to page 17
ENZFELDER GMBH
Open the catalog to page 18
ENZFELDER GMBH Power transmission- and lifting engineering
Open the catalog to page 19All Enzfelder GmbH catalogs and technical brochures
Product Overview3 Pages
unice worm gear40 Pages
Slip Hubs and Slip Couplings5 Pages
ENZFELDER GmbH Rope winches16 Pages
- Cylinder
- Actuator
- Linear actuator
- Electric actuator
- Rolling bearing
- Lifting table
- Scissor lift table
- Right angle gearhead
- Solid-shaft gearhead
- Flexible coupling
- Shaft shaft coupling
- Stationary lift table
- Flange coupling
- Compact cylinder
- High-efficiency gearhead
- Bevel gearhead
- Rigid coupling
- Electric lift table
- Electric cylinder
- High load capacity gear reducer