Perfactory® Perfactory® 3 Mini Multi Lens with ERM EnvisionTEC’s Perfactory® Mini Multi Lens 3D Printer is a low cost, easy maintenance and user friendly 3D Rapid Prototype Manufacuring System. Using state of the art Digital Light Processing® (DLP) technology from Texas Instruments®, the Perfactory System produces the finest detail in the shortest period of time to create 3D models that range from the conceptual to the fully functional. Machine Perfactory® 3 Mini Multi Lens with ERM Properties * Lens System Lens f = 2.36” (60 mm) Lens f = 2.95” (75 mm) Lens f - 3.35” (85 mm) Build Envelope Build Envelope Increased Productivity Native Voxel Size ERM Voxel Size Increased Productivity Dynamic Voxel Thickness Z Pre-adjusted by each material module * Specifications are subject to change without notice. ** A voxel is a volumetric pixel. Materials Available Ideal for ABStuff ABflex General purpose 15162 S. Commerce Dr Dearborn, MI 48120 • USA Phone +1-313-436-4300 Fax +1-313-436-4303 High temperature molding, architectural models, plating General purpose similar to ABS plastic with flexible characteristics EnvisionTEC GmbH General purpose similar to ABS plastic High temperature applications with fine detail General purpose, master models High temperature applications System Properties »» Build speed in constant through the build up to 1” (25 mm) at 0.0039” (100 µm) voxel thickness »» Economic material use with no vat »» Very few moving parts and minimal consumable components make the system user serviceable »» Quick and easy material changeover www.envisiontec.com [email protected] Footprint (L x W x H): 29” x 19” x 53” (73 x 48 x 135 cm) Weight: 188 lbs (85 kg) Electrical Requirements: 100-120V, 5.4 Amps 220-240V, 2.4 Amps Patents Pending