ULTRA² High Productivity High Resolution Rapid Manufacturing System The ULTRA² is a high productivity, high resolution rapid manufacturing system. It is ideal for any company requiring high precision and speed. There are no limitations to producing any part regardless of geometric complexity when provided as an STL file. The machines are delivered and installed with all relevant software to enable the automatic generation of supports and perfect model production. Resolution and surface finish remains constant over the entire build area due to patented technology based on voxelisation. Machine Properties * Build Envelope XYZ (241 x 140 x 203 mm) to (267 x 165 x 203 mm (102 mm)) Native Voxel** Resolution in X & Y .0035” (90 µm) 0.0018” (45 µm) with pixel tuning Dynamic Voxel Resolution in Z * Specifications are subject to change without notice. ** A voxel is a volumetric pixel. Build Speed for the ULTRA² Voxel Curing Depth (Z) Build Speed for Full Envelope*** ***Material dependent System Properties A single material is used for both build and support Easily removable partially cured perforated supports Very few moving parts make system user serviceable Office friendly plug-and-play operation with a built-in touch screen Extremely reliable system utilizing proven DLP technology A choice of high quality materials are readily available Layerless technology with no stair stepping on inner and outer surfaces Low part cost due to minimal material waste Electrical Requirements: 100–127 VAC, 50/60 Hz, single phase, 8A 200-240 VAC, 50 Hz, single phase, 4A Footprint 29” x 30” x 47” (74 x 76 x 117 cm) 48” x 60” x 69” (122 x 152 x 175 cm) with door open including stand Weight 198 lbs (90kg) Patents Pending envisionTEC GmbH envisionTEC, Inc. www.envisiontec.com Brüsseler Straße 51 | 45968 Gladbeck | Germany Phone: +49 2043 98 75-0 | Fax: +49 2043 98 75-99 15162 S. Commerce Dr. | Dearborn, MI | 48120 Phone: +1 313-436-4300 | Fax +1 313-436-4303 [email protected]