Perfactory® DDP3 The Perfactory® 3 Digital Dental Printer (DDP3) with ERM is a low cost, easy maintenance and user friendly three dimensional Rapid Manufacturing System. Using state of the art Direct Light Projection technology from Texas Instruments®, the DDP3 with ERM System produces the finest detail in the shortest period of time. The DDP3 System is capable of producing crowns, caps, bridges and partials in wax-based polymer as well as glass-filled composites. Machine Properties * Perfactory®3 Digital Dental Printer Build Envelope Projector Resolution Native Pixel Size Pixel Size with ERM Dynamic Voxel Resolution in Z (material dependent)** * Specifications are subject to change without notice. ** A voxel is a volumetric pixel. Materials Available Partials for direct investment casting Caps, crowns and bridges for direct investment casting Caps, crowns and bridges for direct investment casting Full anatomical crowns for direct investment casting FDA-approved temporaries in A1, A2, A3, and B1 shades Gypsum like models Plastic like models High temperature plastic like models System Properties Capable of producing approximately 90 copings or crowns in 2 hours or 30 three-unit bridges in 3 hours. Compatible with 3Shape, Dental Wings and 3M Lava scanner and design software Any STL file from an impression scanner or an Intra Oral Scanner can be printed It is capable of printing models, quads, partials, copings, crowns, and long term temporaries. Material switch is possible in less than one minute. Footprint (L x W x H): 73 x 48 x 135 cm, 29” x 19” x 53” Weight: 150 lbs (70 kg) Electrical Requirements: 100-120V, 5.4A/220-240V, 2.4A Patents Pending envisionTEC GmbH envisionTEC, Inc. www.envisiontec.com Brüsseler Straße 51 | 45968 Gladbeck | Germany Phone: +49 2043 98 75-0 | Fax: +49 2043 98 75-99 1100 Hilton Road | Ferndale, MI | 48220 Phone: +1 248-582-0038 | Fax +1 248-582-0039 [email protected]