*mydirectindustry

EDI MaxAir? PVC

Product catalog summary

Product Overview: The EDI MaxAir™ PVC Diffuser is designed for efficient mixing and aeration applications. It features a coarse bubble diffuser with a proven design, suitable for various demanding applications such as flow equalization, channel aeration, and aerobic digesters.

Key Specifications:

Diffuser Body: Made from PVC or optional CPVC for enhanced chemical and temperature resistance.
Design: Inverted air chamber for uniform air release, with a full 48-inch air release perimeter.
Mounting: Patented Spectrum™ Diffuser Mount for easy installation on any pipe material, available for pipe sizes from 3 to 8 inches, including metric sizes 110 mm and 160 mm.
Configurations: Available in simplex or duplex configurations, with standard sizes in stock for immediate shipment.

Performance Features:

Airflow Capacity: High airflow capacity with clog-resistant self-purge design.
Orifice Design: Multi-level air metering orifices for full utilization over the operating range, minimizing pressure requirements.
Optional Features: Deflector bottom design to prevent large particles from entering the diffuser.

Technical Data:

Simplex Model: Airflow 0-50 scfm (0-79 m3/h), Length 32 inches (813 mm), Dry Weight 6.0 lb (2.7 kg), Net Operating Buoyancy 11 lb (4.9 kg).
Duplex Model: Airflow 0-100 scfm (0-158 m3/h), Length 64 inches (1630 mm), Dry Weight 11 lb (5.0 kg), Net Operating Buoyancy 17 lb (7.7 kg).

Operational Recommendations: Optimum oxygen transfer efficiency is achieved at the middle to low end of the airflow range, with an operating pressure of 2-4 inches (0.5-1.0 kPa).

Contact Information: For parts and system information, contact Environmental Dynamics International at [email protected] or [email protected].

Catalog excerpts

Product Specification Sheet EDI MaxAir™ PVC Diffuser with Spectrum™ Saddle Mount MaxAir coarse bubble diffuser offers proven design and is ideal for both mixing and aeration applications • Inverted air chamber design for uniform air release over a wide airflow range • Patented Spectrum™ diffuser mount for maximum strength and ease of installation on any pipe material • Full 48 inch air release perimeter • Spectrum diffuser mount available for 3 to 8 inch pipe (110 mm & 160 mm also available) • High airflow capacity • Available in 24 inch length • Simplex or duplex configuration • Clog resistant self-purge design • Standard open bottom and optional deflector bottom designs available • Standard sizes IN STOCK for immediate shipment • PVC or optional CPVC construction for maximum chemical and temperature resistance versus steel • Rugged heavy duty construction with full 3 inch connection (stronger than stainless steel) 1 4 3 2 1. Diffuser Body 2. Standard Open Bottom 3. Full 3 inch Diameter Mount 4. Multi-Level Air Metering Orifices w w w.w a s t e w a t e r. c o m Environmental Dynamics International 010112 aeration for life™

Open the catalog to page 1

Product Specification Sheet EDI MaxAir™ diffuser provides broad band, coarse bubble aeration for maximum mixing efficiency. The unit is available in 24 inch standard length. The 24 inch diffuser unit provides a full 48 inch air release perimeter. Air release uniformity and mixing efficiency features multilevel air metering orifice design. This provides full utilization over the entire operating range of the unit. MaxAir diffusers are ideal for the most demanding aeration and mixing applications including flow equalization, channel aeration, aerobic digesters, industrial, and mixing and scouring...

Open the catalog to page 2

EDI MaxAir? PVC

EDI MaxAir? PVC

Catalog excerpts

All Environmental Dynamics International catalogs and technical brochures