video corpo

EDI ATLAS-EC?

EDI ATLAS-EC?

EDI ATLAS-EC?

Product catalog summary
Product Overview: The EDI ATLAS-EC™ (External Clarifier System) is designed to enhance lagoon-based wastewater treatment systems by utilizing conventional clarification technology. It addresses issues such as hydraulic or organic overload, inadequate BOD or TSS reduction, poor ammonia conversion, high effluent total nitrogen, and reduced cold weather performance.
Key Specifications:
  • Full nitrification with less than 1.5 mg/L even in cold climates.
  • Maximum BOD and TSS control with levels below 15 mg/L.
  • Complete mix basin with continuous or sequential BioMizer™ designs.
  • Low food to biomass (F/M) ratio for process stability and minimal biological solids production.
System Components:
  • Complete Mix Reactor
  • Floating Lateral Aeration System
  • External Mechanical Clarifier
Operational Benefits: The system increases microorganism inventory by operating in a complete mix, activated sludge mode with an external mechanical clarifier for solids recovery and return. This allows for shorter hydraulic residence time, long sludge age, and low F/M ratio, enhancing process stability and cold weather performance.
Energy Efficiency: When combined with EDI's high-efficiency FlexAir® diffused aeration system and BioMizer™ mixing technology, the ATLAS-EC system is highly energy-efficient.
Nitrogen Reduction: The system can reduce total nitrogen through co-current nitrification/denitrification by maintaining low dissolved oxygen concentrations. Additional benefits include alkalinity recovery and reduced energy consumption.
Contact Information: For parts, contact [email protected]. For system information, contact [email protected]. Visit www.wastewater.com for more details.
See more

Catalog excerpts

EDI ATLAS-EC?-1

Product Specification Sheet EDI ATLAS-EC™ (External Clarifier System) Lagoon-Based Activated Sludge System for Advanced Treatment Performance • Full nitrification; less than 1.5 mg/L even in cold climates • External mechanical clarifier for optimum solids separation • Maximum BOD and TSS control; less than 15 mg/L • Mechanical rake system for positive solids recovery and scum control • Complete mix basin with continuous or sequential BioMizer™ designs available. • High level of (F/M) process control with RAS and WAS pumping • Low food to biomass (F/M) ratio for process stability and minimum biological solids production • Upgrade existing or new lagoons 1. Complete Mix Reactor 2. Floating Lateral Aeration System 3. External Mechanical Clarifier 2 1 3 w w w.w a s t e w a t e r. c o m Environmental Dynamics International 010112 aeration for life™

 Open the catalog to page 1
EDI ATLAS-EC?-2

Product Specification Sheet The EDI ATLAS-EC™ (External Clarifier) system uses conventional clarification technology to improve the performance capabilities of lagoon-based wastewater treatment systems. Conventional lagoon treatment systems that are experiencing any of the following conditions can benefit from the ATLAS-EC system: • Hydraulic or organic overload • Inadequate BOD or TSS reduction • Poor ammonia conversion • High effluent total nitrogen • Reduced cold weather performance Biological processes are limited in their ability to treat wastewater by the mass of microorganisms that can...

 Open the catalog to page 2
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.