*mydirectindustry

Catalogs
ENVEA
Stack pollution monitoring: Multi-gas Infra Red Fourier Transform (FTIR) Analyzer

Stack pollution monitoring: Multi-gas Infra Red Fourier Transform (FTIR) Analyzer

Product catalog summary

Overview: The MIR FT Multi-Gas Infrared Fourier Transform (FTIR) Analyzer is designed for simultaneous measurement of multiple gases including HCl, NO, NO2, SO2, CO, CO2, HC, CH4, NH3, HF, and H2O. It is suitable for analyzing hot, wet, and corrosive gases.

Features and Benefits:

Excellent calibration stability with automatic correction of spectral interferences.
Reduced maintenance requirements to optimize operational expenditure (OPEX).
Rugged design insensitive to vibrations.
Fanless touchscreen panel PC with Windows-based eSAM FT software for data acquisition and processing.
180°C heated sample line and measurement cell to prevent sample loss or alteration.

Compliance: The analyzer complies with QAL 1 EN 14181 and CSA MC 040031/12 standards.

Technical Specifications:

QAL 1 certified ranges for various gases, e.g., CO (0-75/300/1500 mg/m³), CO2 (0-25%), SO2 (0-75/300/1500 mg/m³), etc.
Repeatability: ± 2% of Full Scale (F.S.).
Zero and span drift: ± 1% of F.S. over 30 days.
Lower detectable limit: 2% of F.S.
Response time: < 120 seconds depending on the gas.
Interferometer resolution: 8 cm^-1.
Measurement cell: multi-reflection, 5 meters.
Power supply: 220 V, ± 15%, 50-60 Hz, 200 VA.
Communication port: Ethernet.
Dimensions: 19'' rack, 616 x 483 x 220 mm (DxWxH).
Weight: Approximately 20 kg.
Operating temperature: +10°C to +35°C.

Main Options:

Heated gas sampling system (HOFI).
O2 measurement using a heated zirconia cell.
Programmable outputs: 0/10 V - 0/4-20 mA.
Solenoid valves for dynamic calibration.

System Components: The complete system includes a sample extraction and conditioning probe, heated sample line, automatic calibration unit, instrument air drying system, and eSAM FT data acquisition and processing software.

Certifications: The analyzer is certified under ISO 45001:2018, ISO 14001:2015, and ISO 9001:2015.

Catalog excerpts

Stack pollution monitoring: Multi-gas Infra Red Fourier Transform (FTIR) Analyzer-1

■ Simultaneous, multi-gas measurement of: HCl, NO, NO2 (NOx), SO2, CO, CO2, HC, ■ Excellent calibration stability ■ Automatic correction of spectral interferences ■ Reduced maintenance to optimize OPEX Rugged and insensitive to vibrations Fanless touchscreen panel PC with Windows based eSAM FT software for on-board data acquisition and processing 180°C heated sample line / measurement cell (in association with HOFI sampling system according to the application), ensuring no sample loss or alteration of sample matrix

Open the catalog to page 1

Stack pollution monitoring: Multi-gas Infra Red Fourier Transform (FTIR) Analyzer-2

Elevating standards. For life. MIR FT MULTI-GAS INFRARED FOURIER TRANSFORM (FTIR) ANALYZER Repeatability ± 2% of Full Scale (F.S.) Zero drift ± 1% of F.S. / 30 days Span drift ± 1% of F.S. / 30 days Lower detectable limit 2% of F.S. Reponse time < 120s depending on the gas Interferometer resolution 8 cm-1 Measurement cell multi-reflexion, 5 m Power supply 220 V, ± 15%, 50-60 Hz, 200 VA Communication port Ethernet Dimensions (mm) rack 19", 616 x 483 x 220 (DxWxH) Operating temperature + 10°C to + 35°C MEASURING RANGES Expressed in mg/m3 or % when indicated. Other ranges available upon request....

Open the catalog to page 2

All ENVEA catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list