Emissions & process Monitoring Systems Stack gas sampling system The dry permeation technique : Designed to meet almost all gas sample condition using exclusive dry sampling method: ideal for sampling of corrosive gases The SECTM BOX offers an exclusive sampling system with no loss of condensable gases. EXCLUSIVE FEATURES: S ampling probe equipped with double stage particulate filtration S uitable for sampling of highly soluble gases P ermeation-based drying system (no condenser), avoiding the loss of highly soluble gases such as HCl, SO2 and NO2 D irect span gas injection to the probe for a complete system calibration A utomatic backflush for reduced maintenance C lean and dry sample transferred via unheated line at ambient air temperature up to 100 m distance L arge selection of probes available depending on the process conditions (stack diameter, gas temperature, water content, particulates concentration) O ptional built-in temperature and velocity sensors (no additional flange) H eated probe with a choice of materials and lenghts to suit the application SEC sampling system on stack MAIN Applications: • • • • • • • Waste Incineration (Municipal Energy from Waste or Industrial) Sludge Incineration Gas turbines Power Plants Boilers Paper Mills Glass, Cement, Petro chemistry and Chemical Industry Permeation dryer

Emissions Monitoring Systems Stack gas sampling system SECTM The sample gas, sucked from the stack by means of an ejector, crosses a first primary particulate filter (20 µm), and is directed to the “SEC” box via a heated tube located inside of the sampling probe. The sample gas then passes through a fine particulate filter (0.5 µm), and through a high performance double-stage permeation dryer. At the outlet of the SEC box, the clean and dried sample can be transported to the remote analyzer via an unheated sample line. A solenoid valve allows the backflush of the sample line at regular frequency...