QAL_991_particulate_measurement_system_PCME_ENVEA
4Pages

{{requestButtons}}

Catalog excerpts

QAL_991_particulate_measurement_system_PCME_ENVEA - 1

QAL1 Approved PM-CEM PROCESS & EMISSIONS MONITORING SYSTEMS SPECIFIC FEATURES: Complies with standards EN 13284-2, EN 14181 and EN 15267-3 Suitable for bag-filter applications with an Emission Limit Value (ELV) of 7.5 mg/m3³ (Incineration) and 15 mg/m3³ (Co-incineration) Automatic recording of span and zero checks to satisfy QAL3 requirements

Open the catalog to page 1
QAL_991_particulate_measurement_system_PCME_ENVEA - 2

TECHNOLOGY / APPLICATION SYSTEM DESCRIPTION © Dantherm Filtration Ltd. Reproduced with kind permission. The PCME QAL 991 is an approved particulate CEM (Continuous Emission Monitor) complying with monitoring standards EN 14181 and EN 13284-2. The instrument holds a QAL1 approval to the latest performance requirements specified in EN 15267-3. The PCME QAL 991 benefits from using patented ElectroDynamic ® measurement technology and is particularly suited for monitoring emissions from Waste Incineration Plant where emissions are controlled with dry scrubbing and bag-filter technology. The...

Open the catalog to page 2
QAL_991_particulate_measurement_system_PCME_ENVEA - 3

The PCME QAL 991 sensor provides a complete solution for measurements according to EN 14181 in its specified application range. The instrument holds a QAL1 certification range of 0-7.5 mg/ m3, meaning that it is suitable for compliance reporting from processes with daily Emission Limit Values (ELVs) as low as 5 mg/m3 (e.g. Incineration plant). The measurement and calibration features facilitate a 15-point/5-point calibration (QAL2) and permit the specification of a valid calibration range. The internal Quality Assurance features of the instrument have been designed and approved to meet the...

Open the catalog to page 3
QAL_991_particulate_measurement_system_PCME_ENVEA - 4

Network Modules (can be connected to Controller Network systems to provide additional Inputs and Outputs) As a progressive environmental Company, ENVEA specialises in particulate measurement for industrial processes. With a worldwide reputation for reliability, innovation and technological excellence, the Company produces under the trademark envea™ equipment for concentration and mass monitoring for regulatory, environmental and process control requirements. A dedicated team of qualified application and sales engineers is always on hand and should be consulted in the selection and usage of...

Open the catalog to page 4

All ENVEA catalogs and technical brochures

  1. LAS 5000XD

    2 Pages