EXTRACTIVE PARTICULATE MEASUREMENT SYSTEM envea QAL 182 WS automates CEMS validation; designed for wet stacks with high moisture, ensuring accurate emissions monitoring despite challenging conditionsFEATURES AND BENEFITS ■ Second Generation compliance continuous particulate monitor, QAL1 certified against EN 1 5267-3 to meet EN 14181 and other International standards ■ Extractive sampling probe with heated line configured for isokinetic or fixed velocity sampling Extractive system includes ProScatter™ technology using a forward scatter PM sensor system ■ Easy to use intuitive multi-lingual menu with large display for improved user interface complete with on-board diagnostics and multiple analogue and digital communication outputs

EXTRACTIVE PARTICULATE MEASUREMENT SYSTEM Elevating standards. For life. SYSTEM DESIGN Flue Gas Temperature Up to 180°C (for higher temperatures, please consult ENVEA) This extractive approach, with heating, overcomes the problem of interference from condensation and water droplets when using an in-situ particulate monitor after wet FGD, wet ESP and wet SNCR scrubbing and filtration systems which produce a wet/condensing flue gas. The sample is superheated and exits into a controlled sample chamber. 1200 mm (other lengths on request from ENVEA) PVDF (standard) corrosion resistant, maximum stack...