Catalogs >
ENVEA >
PCME QAL 181 CEMS dust monitor

PCME QAL 181 CEMS dust monitor
5Pages

Catalog excerpts

Particulate Measurement System PROCESS & EMISSIONS MONITORING SYSTEMS SPECIFIC FEATURES: ProScatter® Forward-scatter technology with a minimum detection limit of < .05 mg/m3 0 Complies with Waste Incineration Directive and Large Combustion Plant Directive EN 13284-2 and EN 14181 (Europe) ProScatter® technology provides enhanced measurement due to reduced crosssensitivity to particle type and size compared to other scatter monitors Forward-scatter measurement technique with automatic zero and span checks that fully challenge the system’s ability to measure forward-scattered light and satisfy daily drift checks Robust and rugged for challenging high-temperature 500 °C stack conditions and Ex hazardous zones

Open the catalog to page 1

TECHNOLOGY / APPLICATION SYSTEM OVERVIEW © Lühr Filter. Incinerator. Image reproduced with kind permission. The PCME QAL 181 sensor is suitable for measuring particle emissions from most dust arrestment plant. The PCME QAL 181 utilises ENVEA’s patented ProScatter® forward-scatter measurement technique for measuring particulate concentration levels, typically between 0.05 mg/m3 and 300 mg/m3. As an approved particulate CEM complying with monitoring standards EN 14181, EN 13284-2, the instrument holds QAL1 approvals the requirements of EN 15267-3 with both MCERTS version 3 Class 1 and TUV...

Open the catalog to page 2

PRODUCT FEATURES QUALITY ASSURANCE/AUDITING The PCME QAL 181 ProScatter® forward-scatter instrument is supported by Filter Audit units that use ‘scattering bodies’, an approved reference material for conducting quarterly Linearity checks as part of AST or QAL2 procedures. To audit the instrument, the sensor is temporarily removed from the stack and the Filter Audit units are inserted into the PCME QAL 181 measurement zone (Figure 4). The resulting response is measured to ensure linearity and also to provide a reference check that ensures contamination is not affecting instrument...

Open the catalog to page 3

SPECIFICATIONS Network Controllers Standard Controller Multiple Data Viewing Dimensions Power supply voltage Protection Rating Ambient Temperature Range 1 Two-tone grey, backlit graphical LCD PC or RS-485 W220 x H123 x D80 mm 100–240V AC (50/60 Hz) IP65 -20°C to 50°C Navigation keys 1–32 High-contrast, anti-glare 7” (viewable) TFT LCD PC/RS-485/Ethernet simultaneously W390 x H221 x D118 mm 85–265V AC (50/60 Hz) IP66 -20°C to 50°C Up /Dow n /Le ft/Rig h t/Ente r plus 5 function keys: 3x short-cut keys and 2 user-programmable keys Icon-driven, multilingual menus Secure password protection...

Open the catalog to page 4

Die-cast aluminium (polyester powder coated) Connection Required on Duct Hole pattern to suit DN80 PN10/PN16 or 3” 150 ANSI (hole ID at least ø mm) lb 88 Power Requirements 24V provided by the control unit Cable Entries 3x M20 cable entry glands Requires continuous air purge at 30–40 litres/minute Certificate number: Certificate code: DUST ZONE Certificate number: Certificate code: Nominal Insertion Length Adjustable Insertion Overall Length ABOUT ENVEA As a progressive environmental Company, ENVEA specialises in particulate measurement for industrial processes. With a worldwide...

Open the catalog to page 5

PCME QAL 181 CEMS dust monitor 5Pages

Catalog excerpts

All ENVEA catalogs and technical brochures

PCME QAL 181 CEMS dust monitor
5Pages