Catalogs >
ENVEA >
NEW CEMS Hg monitor SM-5 for compliance with new BREF

NEW CEMS Hg monitor SM-5 for compliance with new BREF
2Pages

Catalog excerpts

NEW CEMS Hg monitor SM-5 for compliance with new BREF - 1

Mercury CEMS Analyzer SM-5 EMISSIONS MONITORING SYSTEMS The SM-5 mercury analyzer is designed to provide accurate and reliable continuous measurements of very low mercury concentrations in stack flue gases (CEMS). Very low certification range, which meets national and international regulatory requirements. SPECIFIC FEATURES: Q AL1 certification range 0-5 µg/m3, the lowest on the market A dditional ranges: 0-30; 0-45; 0-100; 0-1000 µg/m3 D ynamic range switching for reliable measurement of Hg peak emissions Photometric measurement independent of the high-temperature converter to ensure very low maintenance times and costs H igh temperature conversion method: requires no reagent, water refill or cartridge replacement D oes not require a calibrator (injection system for QAL3 calibration available as an option) M odular mercury injection system at the probe or at the analyzer for complete AMS checks P robe head port for optionally connecting a calibration system N o need for carrier gas, dilution or air conditioning S ampling box mounted on the stack: no maintenance required O ptional, two different power sources (protected/unprotected) in order to separate and secure the measuring system Automatic backflush function L ow maintenance and optimized operating costs MAIN APPLICATIONS: Regulatory control of mercury emissions: Waste-to-energy plants (WtE), Cement kilns, Sulfuric acid production plants, Steel industry, Coal-fired power plants...

Open the catalog to page 1

NEW CEMS Hg monitor SM-5 for compliance with new BREF - 2

EMISSIONS MONITORING SYSTEMS Continuous mercury monitoring SM-5 MEASURING PRINCIPLE: The SM-5 uses the principle of high temperature thermal conversion in combination with Cold Vapor Atomic Absorption Spectroscopy (CVAAS). The extractive sampling is performed without dilution using a heated probe coated with a specific surface treatment and equipped with a ceramic filter. A heated line transfers the sample to the analysis cabinet, where a hightemperature quartz furnace (950°C) thermally converts all forms of oxidized or particulate mercury into elemental mercury Hg. Certified measuring...

Open the catalog to page 2