CONTINUOUS EMISSIONS MONITORING SOLUTIONS Minimize unavoidable industrial emissions through continuous monitoring and abatement.

4.1.1 Non-dispersive infrared (NDIR) analyzers 12 4.1.2 Fourier transform infrared (FTIR) analyzers 14 4.1.4 Flame ionization detection (FID) analyzers 18 4.1.6 UV absorbance (UVA) photometric analyzers 19 4.1.8 Dilution based cems 20

envea 5. Mercury monitoring 24 9. Data acquisition & regulatory reporting 32 11. Customer service & support 37

As environmental regulations tighten, industries face increasing pressure to accurately monitor and control emissions. Power generation, waste treatment, and industrial processes release pollutants such as nitrogen oxides (NOx), sulfur dioxide (SO2), carbon monoxide (CO), particulate matter, and other hazardous gases. Continuous monitoring is essential to ensure compliance, minimize environmental impact, and maintain operational efficiency. • Ensure full compliance with evolving environmental regulations. • Gain real-time visibility of emissions. • Detect deviations before they become issues....

Growth milestones Establishment of the company Creation of the Italian subsidiary Listing of ENVEA in France Establishment of the Indian subsidiary 2014 Acquisition of SWR engineering Messtechnik GmbH Acquisition of Cosma (France) Establishment of the Chinese subsidiary Creation of the Emission business division Delisting of ENVEA, which is acquired by CARLYLE and Acquisition of Hycontrol, CAI, Asia Pacific Air Quality Group, KENVITECH Inc., Airmodus Ltd., Droplet Measurement Technologies LLC

Take control of your emissions and stay one step ahead of regulation. Drive actionable data to monitor, control and minimize your emissions. CONTINUOUS SAMPLING SYSTEM • Dioxins • Furans • Mercury • Biogenic CO2 FLOWMETERS • Micro-venturi • Averaging Pitot • FlowSonic™ PARTICULATE MONITORS • ElectroDynamic™ • ProScatter™ • DynamicOpacity™ EXTRACTIVE GAS MONITORS • FTIR • NDIR GFC / NDIR • FID • CLD • UV • CVAAS IN-SITU GAS MONITORS • TDLAS • NDIR GFC AIR POLLUTION CONTROL SYSTEM WEX® SOFTWARE LEAK DETECTORS SAMPLING LINES STACK TESTING PORTABLE ANALYZERS • Heated • Unheated • Freeze Protection...

Application ENVEA Solutions, based on high performance analysers designed and manufacture in house, are conceived as turnkey solutions, from sample extraction to analysis, data acquisition, and report management. Each system is configured to meet the technical and regulatory requirements of our clients across industries: ENERGY & POWER (COMBUSTION) • Coal-Fired Power Plants • Biomass Plants • Diesel Engines & Reciprocating Engines INCINERATION & CO-INCINERATION • Municipal Solid Waste • Solid Recovered Fuels (SRF) • Industrial Waste • Medical / Clinical Waste • Sewage Sludge • Hazardous Waste...

The gas sample is extracted and conditioned before or after transport, in order to have all moisture and condensable components removed prior to its analysis. At the inlet of the analyzer, the sample is clean, dry, at ambient temperature & water interference-free. The gas sample is extracted and transferred through heated sampling lines. It is heated above 190°C in order to avoid acid dew points for the analysis process. At the inlet of the analyzer, the sample is hot and wet. • Integrated back flush function. • Multi-component measurement possible. • Allow calibration injection at sample point...

envea Such system is designed to continuously measure & analyze, dust monitoring and/or gas emission, directly in the stack with or without sample extraction. The analyzer is installed at the sampling point. One of the main gas analysis technologies used is Tunable Diode Laser Spectroscopy (TDLS). There are two types of in-situ monitoring: Cross-stack Probe Analysis over entire stack diameter A light source is sent across the interior diameter of the stack to a detector. The signal passes through the flue gas where it is then absorbed for measurement & analysis. In-situ analysis A probe, containing...

Uses an exclusive high performance permeation drying technique, designed to meet almost all gas sample conditions. Ideal for highly soluble and corrosive gases. FEATURES & BENEFITS • Sampling probe equipped with double stage particulate filtration • Direct span and zero gas injection for a complete system calibration • Permeation-based drying system avoids loss of highly condensable gases (e.g. HCl, SO2, NO2 and HF) • To be used with unheated analyzers such as MIR 9000, MIR 9000e, MIR 9000CLD • Automatic back-flush function The HOFI™ BOX offers an exclusive sampling system for heated analyzers....

FEATURES & BENEFITS Heated sampling system The LCPD BOX is a full extractive sampling probe assembly which extracts the sample gas through a probe & heated filter to remove particulates. Stainless steel probe tube with optional reusable primary filter Check valve eliminates dead volume To be used with heated analyzers, or with unheated analyzers, such as MIR 9000, MIR 9000e, MIR-IS, by adding a cooling dryer Single stage dust filtration 190°C heated sampling system without any modification of the gas matrix including water content SAMPLING PROBES Wide range of sampling probes available depending...

The MIR 9000e measures combustion exhaust gas from boiler, or gas emission from different industrial furnaces and process applications. FEATURES & BENEFITS • Automated drift control option • Simultaneous multi-gas measurement of NOx, SO2, CO, O2, residual H2O, and optionally CO2, CH4 and N2O (greenhouse gases) • Environmental-friendly and cost-saving analyzer, with ultra-low power consumption • No compressed air required (if using a gas cooler) APPROVALS & CERTIFICATIONS MIR 9000Multi-gas NDIR-GFC analyzer Offers excellent performance for multigas measurements in dry sampling, including HCl,...