MIR9000CLD multi-gas IR-GFC / CLD analyzer for stack emissions

Product catalog summary

Overview: The MIR 9000 CLD is a multi-gas analyzer utilizing chemiluminescence detection (CLD) and non-dispersive infrared (NDIR) gas filter correlation (GFC) to measure up to 10 dry and corrosive gases simultaneously. It is noted for its low QAL 1 certified range for NOx in the Continuous Emission Monitoring Systems (CEMS) market.

Features and Benefits:

Automatic cross interference correction and interactive menu-driven software for ease of operation.
Unheated sample line enabled by permeation drying technology.
On-board oxygen measurement for environmental reporting.
High accuracy and stability with automatic optical stability checks.
Intrinsic security with on-board residual H2O measurement.
Built-in data logger for seven additional parameters such as flow, pressure, and temperature.

Compliance: The analyzer complies with QAL 1 EN 15267-3, QAL 3 EN 14181, and 40 CFR 60 & 75 standards.

Technical Specifications:

Measuring ranges for various gases, e.g., NOx (CLD) 0-200 / 5000 mg/m³, CO2 0-10 / 100%.
Repeatability of less than 2% of Full Scale (F.S.), zero drift of less than 2% F.S. over 30 days, and span drift of less than 1% F.S. over 7 days.
Power supply requirements: 80 - 230V, 50-60 Hz, with a power consumption of 300 VA.
Operating temperature range: +5°C to +40°C.
Available in different versions with varying dimensions and weights.

Principle of Operation: The IR GFC measures gas absorption at specific IR wavelengths, while chemiluminescence detects light from the NO-ozone reaction, producing signals proportional to gas concentration.

Main Options: The system can include sample extraction and conditioning probes, cold sample lines, calibration modules, and data management systems. It is available in a 19’’ rack version or a tight box configuration.

Certifications: The product is certified under ISO 45001:2018, ISO 14001:2015, and ISO 9001:2015.

Catalog excerpts

MIR9000CLD multi-gas IR-GFC / CLD analyzer for stack emissions-1

MULTI-GAS NDIR-GFC ANALYZER envea The MIR 9000 CLD uses chemiluminescence detection to measure up to 10 dry and corrosive gases simultaneously. It offers the lowest QAL 1 certified range for NOx in the CEMS market. FEATURES AND BENEFITS ■ Automatic cross interference correction ■ Interactive menu-driven software allowing ease of operation ■ Unheated sample line thanks to the permeation drying technology ■ On-board oxygen measurement for environmental reporting ■ Highly accurate, excellent stability with automatic optical stability check ■ Intrinsic security with on-board residual H2O measurement ■ Built-in data logger for 7 additional parameters (flow, pressure, temperature or any other analogue input)

Open the catalog to page 1

MIR9000CLD multi-gas IR-GFC / CLD analyzer for stack emissions-2

Elevating standards. For life. MIR 9000 CLD MULTI-GAS NDIR-GFC ANALYZER MEASURING RANGES PRINCIPLE OF OPERATION HC Repeatability Zero drift Span drift Linearity Power supply Power consumption Communication port Operating temperature Version with CLD (tight box) Version without CLD (tight box) Version without IR (Rack 19'') Lowest / Highest available ranges Expressed in mg/m3 or % when indicated. Other ranges available upon request. IR GFC measures gas absorption of specific IR wavelengths; chemiluminescence detects light from NO-ozone reaction, producing signals proportional to gas concentration...

Open the catalog to page 2