1. Catalogs
  2. ENVEA
  3. Amesa-M Mercury Sampler (Hg)

Amesa-M Mercury Sampler (Hg)

Amesa-M Mercury Sampler (Hg)

Amesa-M Mercury Sampler (Hg)

Product catalog summary
Introduction: The Sorbent Trap Monitoring System (STMS) is designed for continuous mercury emission monitoring, adhering to US EPA Performance 12B standards. It is part of the AMESA-M system, which builds on over 20 years of experience in continuous sampling of dioxins and furans.
Specific Features:
  • Extraction of flue gas using a heated sample probe.
  • Mercury sampling on paired adsorbent traps for quality assurance.
  • Integrated display for flow control and direct measurement of flue gas flow.
  • Sampling rate proportional to flue gas flow, with automated periods from 30 minutes to 4 weeks.
  • Remote control via Internet or Intranet using TCP/IP connection.
  • Data transfer via USB flash drive and moisture measurement for 'dry' correction in reports.
  • Autonomous operation with all steps manageable from the integrated display.
  • System components are housed in a protective cabinet, ensuring reliability and low maintenance.
Main Applications: The system is applicable in municipal and hazardous waste incinerators, cogeneration and gas turbines, industrial boilers and furnaces, power and combustion plants, glass, chemical, petrochemical plants, and cement kilns.
Principle of Operation: The AMESA-M system is designed for continuous mercury monitoring. It consists of a control cabinet and a sample probe assembly. The heated sample probe uses paired Hg-sorbent traps to extract samples under volume proportional conditions. A process control computer in the stack box manages measurement and control functions. The extracted gas is cooled, moisture is removed, and the gas is measured for volume and flow. Data is stored for up to four weeks and can be downloaded via USB.
System Components:
  • Sampling cabinet includes flow, temperature, and pressure measurement with leak test interface.
  • Built-in pitot tube and thermocouple for volume proportional sampling.
  • Control cabinet with sample gas conditioning for condensate collection and accurate volume and flow measurement, protected by an IP40 enclosure.
See more

Catalog excerpts

Amesa-M Mercury Sampler (Hg)-1

Sorbent Trap Monitoring System (STMS) for continuous mercury emission monitoring PROCESS & EMISSIONS MONITORING SYSTEMS More than 20 years experiences of continuous sampling of Dioxins and Furans (PCDD/PCDF) with the AMESA system, MCERTs & TÜV certified, were used to design the AMESA M for continuous sampling of mercury. SPECIFIC FEATURES: Sorbent Trap Monitoring System (STMS) to US EPA Performance 12B (30B Test Reference Method) E xtraction of a portion of the flue gas by a heated sample probe Mercury sampling on a paired adsorbent traps (for quality assurance purposes, as required by US EPA regulations) Integrated display for flow control (pitot tube) - direct measurement of flue gas flow Sampling rate proportional to flue gas flow Fully automated sampling periods from 30 minutes up to 4 weeks Remote control via Internet or Intranet using a TCP / IP connection Easy transfer of operating data protocol via USB flash drive Moisture measurement, “dry” correction for the report Totally autonomous. Each step can be done directly from the integrated display: it is not necessary to add electronic devices such as a laptop. All parts of the system installed and well protected in a cabinet that takes advantage of the many years of experience gained with the AMESA dioxin sampler Highly reliable system requiring low maintenance Accurate monitoring of mercury at emission in the 1 µg/m3 range MAIN APPLICATIONS: Municipal and Hazardous Waste Incinerators Cogeneration and gas turbine Industrial Boilers and Furnaces Power & Combustion Glass, Chemical & Petrochemical Plants Cement Kilns

 Open the catalog to page 1
Amesa-M Mercury Sampler (Hg)-2

PROCESS & EMISSIONS MONITORING SYSTEMS Sorbent Trap mercury Monitoring System (STMS) AMESA-M Built-in pitot tube and a thermocouple to sample under volume proportional conditions The AMESA-M long-term sampling system is designed to meet the requirements of continuous mercury monitoring applications. This unique system is a development of the proven AMESA system originally designed to measure micro-pollutants .(such as dioxins/furans) in flue gas streams. The AMESA-M consists of a control cabinet and a sample probe assembly. The heated sample probe is equipped with paired Hg-sorbent traps which...

 Open the catalog to page 2

All ENVEA catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.