Catalogs >
ENVEA >
QAL181 stack particulate monitor QAL1 certified

QAL181 stack particulate monitor QAL1 certified
4Pages

Catalog excerpts

QAL181 stack particulate monitor QAL1 certified - 1

Particulate Measurement System PROCESS & EMISSIONS MONITORING SYSTEMS SPECIFIC FEATURES: ProScatter® Forward-scatter technology with a minimum detection limit of <0.05 mg/m3 Complies with Waste Incineration Directive and Large Combustion Plant Directive EN 13284-2 and EN 14181 (Europe) ProScatter® technology provides enhanced measurement due to reduced crosssensitivity to particle type and size compared to other scatter monitors Forward-scatter measurement technique with automatic zero and span checks that fully challenge the system’s ability to measure forward-scattered light and satisfy daily drift checks Robust and rugged for challenging high-temperature 500 °C stack conditions and Ex hazardous zones HE QUEEN'S AWARDS FOR ENTERPRISE;

Open the catalog to page 1

QAL181 stack particulate monitor QAL1 certified - 2

TECHNOLOGY / APPLICATION SYSTEM OVERVIEW © Lühr Filter. Incinerator. Image reproduced with kind permission. The PCME QAL 181 sensor is suitable for measuring particle emissions from most dust arrestment plant. The PCME QAL 181 utilises ENVEA’s patented ProScatter® forward-scatter measurement technique for measuring particulate concentration levels, typically between 0.05 mg/m3 and 300 mg/m3. As an approved particulate CEM complying with monitoring standards EN 14181, EN 13284-2, the instrument holds QAL1 approvals the requirements of EN 15267-3 with both MCERTS version 3 Class 1 and TUV...

Open the catalog to page 2

QAL181 stack particulate monitor QAL1 certified - 3

PRODUCT FEATURES QUALITY ASSURANCE/AUDITING The PCME QAL 181 ProScatter® forward-scatter instrument is supported by Filter Audit units that use ‘scattering bodies’, an approved reference material for conducting quarterly Linearity checks as part of AST or QAL2 procedures. To audit the instrument, the sensor is temporarily removed from the stack and the Filter Audit units are inserted into the PCME QAL 181 measurement zone (Figure 4). The resulting response is measured to ensure linearity and also to provide a reference check that ensures contamination is not affecting instrument...

Open the catalog to page 3

QAL181 stack particulate monitor QAL1 certified - 4

ABOUT ENVEA As a progressive environmental Company, ENVEA specialises in particulate measurement for industrial processes. With a worldwide reputation for reliability, innovation and technological excellence, the Company produces under the trademark envea™ equipment for concentration and mass monitoring for regulatory, environmental and process control requirements. A dedicated team of qualified application and sales engineers is always on hand and should be consulted in the selection and usage of the most suitable equipment for any particulate application. ENVEA UK ENVEA House Rose and...

Open the catalog to page 4

QAL181 stack particulate monitor QAL1 certified 4Pages

Catalog excerpts

All ENVEA catalogs and technical brochures

QAL181 stack particulate monitor QAL1 certified
4Pages