DYNACO D-310 The DYNACO D-310 LF (Low Friction) is designed for inside applications. It is a perfect, entry level solution for applications targeting 25.000 cycles per year. As all DYNACO doors, the D-310 LF requires little space. It protects your installation against drafts, humidity, dust and dirt. With its speed and good seal, the D-310 LF improves your traffic flow and increases employee comfort. A DYNACO D-310 LF door also assures significant savings on energy costs. Printable curtain The patented side guides and «BEAD» technology provide a good seal and allow energy savings. ■ CRASH FORGIVING...

Gravity driven low friction technology inside door EN13241-1 STANDARDS Water permeability Wind load Opening speed Closing speed Folded steel 37 x 52 x 3 mm, galvanised before cutting and folding Side guides 2 poles, with brake. Power 0,5 kW Protection degree: IP 54 Integrated controller Push buttons open-close-stop standard Standard detectors Infrared barrier: 60 mm from the floor. DBD: correct unwinding detector Power supply Three phased 230 V / 400 V - 6 A / 3 A Single phase not available Frequency: 50 Hz Wind permeability Safe openings Mechanical resistance Unintended movements * Interior...

Dimensions and installation requirements DYNACO D-310 320 All indicated dimensions are based on exact width and height dimensions only. The space necessary for mounting and maintenance has to be provided. REMARK: Based on the risk analysis of the environment, extra push buttons, detectors and covers might be required. © All rights reserved by Dynaco – 2014 The DYNACO Entrematic products are protected by worldwide registered patents. As part of its policy of continuous product development, DYNACO Entrematic reserves the right to change the characteristics of its products or components without...