Catalogs >
ENSTO >
SZ 24 Disconnector

SZ 24 Disconnector
4Pages

Catalog excerpts

SZ 24 DISCONNECTOR Ensto Overhead

SZ 24 Disconnector is an ideal Solution for MV overhead lines SZ 24 is tested and approved according to the newest international standards. Its breaking capacity is 12.5 A, mostly sufficient for rural areas on branch lines. Disconnection Point on The Network Occasionally a part of the network needs to be disconnected e.g. during repair work, when removing trees leaning on the line or during transformer maintenance. To make the fault recovery time shorter, there is need for several disconnection points in the line. This is very expensive when using the conventional disconnectors. Moreover,...

Open the catalog to page 2

SZ 24 DISCONNECTOR Pole Mounted Substation and Cable Termination Normally there is need for a disconnector on pole mounted substations or on a cable termination, but it is very seldom operated. The disconnector is typically operated only during maintenance or repair work maybe once in ten years. Therefore a traditional disconnector would be expensive in these applications. Ensto´s SZ 24 disconnector offers reliable and cheap solutions for transformer and cable termination installations. It can be installed on a span with line insulators or together with tension insulator on tension...

Open the catalog to page 3

ENSTO SEKKO OY P.O.BOX 51 06101 PORVOO, FINLAND TEL.+358 (0)204 76 21 FAX +358 (0)204 76 2770 UTILITY.NETWORKS@ENSTO.COM WWW.ENSTO.COM UTILITY NETWORKS

Open the catalog to page 4