Ensto Cubo P pane building system
20Pages

Saves Your Energy Panel building system panel building system

Panel Building System Ensto Cubo Ensto Cubo P Panel Building System is designed in response to our customers’ wishes. The system includes several unique and innovative solutions. This catalogue shows how to build a complete panel of Ensto Cubo P enclosures, step by step. In the picture of the assembly you see each phase or step and the parts needed, as well as the way of mounting; the table shows you the part numbers for the products needed in each assembly stage. Open construction in the assembly stage The base part is totally open in all four directions and enables fast and efficient...

The base is made of glass reinforced polycarbonate and has four totally open sides. The red locking pins are pushed in place to lock the bases and the connecting collars together. At the assembly stage the red locking pins should be pushed only halfway to allow easy mounting of the connecting ribs. See page 16 for more information. The bases are first joined together either vertically or horizontally after which the ”rows” are connected together. Product code The connecting collars are provided with PUR gaskets and quick-snap hooks. The collar connects the bases together. Bases, glass...

Panel support Product code Panel support accessories 1 PVR1.1 2 Support rail, U profile Triangle support plate, set Bolts + cage nut for mounting bases to rail, set of 4 pcs Bolts for assembly of rails, set of 4 pcs

Supports for Al/Cu busbars Busbar supports The base part of the support is always mounted first. Choose the right busbar width: 5 or 10 mm. The upper part can be placed in four different positions by moving it sidewards or turning it upside down. The Ensto Cubo P supports are tested to 630 A, EN 60439-1. Heights for 5 mm wide busbar: 10, 12, 15 or 20 mm The base part of the support. Heights for 10 mm wide busbar: 10, 12, 20 or 30 mm The upper part for 5 mm busbars. The upper part for 10 mm busbars. The base part (1) of the support is mounted first with two screws (4) Product code Busbar...

Terminals for Al/Cu busbars No. Product code Description for busbar Weight (kg) Package size (pes) EAN 13 code Terminals for Al/Cu busbars Mounting plates and DIN rails

The components assembled in the enclosure define the required height of the profiles for DIN rails. The material of the profiles and mounting plates is galvanized steel. Product code Mounting plates, FeZn 1 OMP3030 Profiles for DIN rails, 32.5 mm high, pair PRE2.32 For 200 mm side Profiles for DIN rails, 14.5 mm high, pair PRE2.14 For 200 mm side

Front panels and drop-stops Thanks to the corner elevators (13), the depth of the front panels is easily adjustable. The drop-stops (12), made of 2 mm polypropylene, are easy to customise. Product code Front panels, rail to rail 125 mm, incl. corner elevator set PFP33 .125.1 For 300 x 300 base, 1 DIN opening for 12 modules For 300 x 400 base, 1 DIN opening for 17 modules For 300 x 400 base, 2 DIN openings for 17 modules For 300 x 400 base, 3 DIN openings for 12 modules For 300 x 600 base, 4 DIN openings for 12 modules For 400 x 600 base, 4 DIN openings for 17 modules For 300 x 300 base, 2...

Complete front panel sets Complete front panel sets include two profiles for DIN rails, a set of corner elevators including four corner elevators, DIN rail(s) and a front panel of polypropylene, a support construction for 600 mm panels, mounting screws and instructions. Product code Complete front panel sets, 14.5 mm high profile, rail to rail 125 mm 1 PFP33A114 For 300 x 300 base, 1 DIN opening for 12 modules For 300 x 300 base, 2 DIN openings for 12 modules For 300 x 400 base, 1 DIN opening for 17 modules For 300 x 400 base, 2 DIN openings for 17 modules For 300 x 600 base, 4 DIN openings...

Product code

All Ensto Cubo P plates are mounted with locking pins. No screws - the plates are mounted easily without any special tools only by pushing the locking pin in its place. The joint is tight; the Ensto Cubo P series is tested to IP 65 degree of protection. If needed, the plates can also be removed without any special tools. The material of the plates is glassreinforced polycarbonate. The plates are provided with a gasket. Cover plate The cover plate can easily be drilled according to your own requirements. Knockout plate The knockout plates are provided with the most common Pg or metric...

SFS plates, cable entries and strain-relief

Product code Separate rubber grommet for cable Ø 27-66 mm Cover plate, F2 size incl. PUR gasket 3 F2251 Knockout flange, F2 size incl. PUR gasket 4 F2252 7 x Pk11 + 7 x Pk9/16, PC 2 Gland flange, F2 size incl. PUR gasket 5 F2157 Membrane flange, F2 size 6 F2202 Membrane flange, F2 size without gasket F2162 3 x Ø30 + 6 x Ø18 + 16 x Ø14 mm, TPE F2163 Extension frames, incl. PUR gasket 7 F2C50E 7 Other flange accessories F2G 9 x Ø18 + 24 x Ø14 mm, TPE 50 mm for F2 flange, PC For F2 flange incl. PSFS3 adapter plate, 50 mm deep, set for 300 mm side Self-adhesive flange gasket, F2 size Flange...

Front panels The hinge component can be mounted in two different ways, thus changing the distance between the panel and the inner base wall. Several front panels can be mounted one on another.

Product code Hinged front panels, incl. corner elevator set, polypropylene, grey RAL 7035 1 PHFP33 For 300 x 300 base For 300 x 400 base, hinged side: 300 mm For 300 x 400 base, hinged side: 400 mm For 300 x 600 base, hinged side: 300 mm For 300 x 600 base, hinged side: 600 mm For 400 x 600 base, hinged side: 400 mm For 400 x 600 base, hinged side: 600 mm Hinged front panels, incl. corner elevator set, aluminium 1 PHFP33A For 300 x 300 base For 300 x 400 base, hinged side: 300 mm For 300 x 400 base, hinged side: 400 mm For 300 x 600 base, hinged side: 300 mm For 300 x 600 base, hinged side:...

Connecting ribs The connecting collars, locking pins and connecting ribs all contribute to a tight jointing of the bases. If needed, the connecting ribs and locking pins can be removed afterwards without any special tools. The connecting rib is provided with a slot, which finally locks the drop-stop in its place. Please note that the connecting rib is mounted in its place before the locking pins are pushed down. See page 3. No. Product code Extensions frames and covers The modular cover can easily be changed from left- to right-handed, thanks to the detachable hinge (8) and locking parts...