Catalogs >
ENSTO >
Auguste

Auguste
8Pages

Catalog excerpts

Saves Your Energy Ensto Auguste SF6 insulated overhead load-break switch Ensuring reliable electricity distribution networks

Open the catalog to page 1

Ensto Auguste SF6 insulated overhead load-break switch Auguste switchgear is an overhead load break disconnecting switch designed to allow a load interruption up to 630 A for a medium voltage (up to 36 kV) electrical overhead line.

Open the catalog to page 2

This switchgear is convenient for all types of networks, especially for those requiring frequent operations in severe weather conditions. It is easily installed below the line, on the side of the pole. The switchgear is extremely reliable, with high-level safety characteristics allowing it to be used with full confidence. Auguste switchgear design is based on extensive experience, in co-operation with the public and private operators of overhead distribution electrical networks. The equipment meets many demands : • Assures quality service • Easy to install • Safe to use • Improves network...

Open the catalog to page 3

Compact Durable Durable Compact Versatile Durable Sustainable Reliable Reliable Sustainable

Open the catalog to page 4

Compact • Two functions in one device (switch + disconnector) • Transformer integrated in the SF6 gas insulated tank • Built-in selective sectionalizing function Versatile • One product - three versions (manual, motorized and remotely operated) • Customized to meet different customer expectations on various markets globally • Complete range of options (fault detection, remote control etc.) • Compatible with the SCADA remote control system Reliable • A well-tried solution; long-term relationships with reputed customers • Operation in extreme climatic conditions all over the world • Suitable...

Open the catalog to page 5

Variety of options and accessories The modular design of the Auguste switch range enables the products to be adapted to the constraints of existing networks and to different modes of operation, as well as to future network evolutions. The load-break switch is installed below the line at the top of the pole. A wide variety of mounting accessories for clamping, strapping or bolting enable the load-break switch to be very easily installed on any type of pole. Load-break switches with manual control mechanism are operable by rod assembly or hot stick. The motorized version uses the existing...

Open the catalog to page 6

Characteristics UNIT Rated breaking current (A) - Mainly active load - Closed loop - No-load transformer - Line-charging - Cable-charging Rated lightning impulse withstand voltage (wave 1.2/50 µs) - Common value - Across the isolating distance Rated power-frequency withstand voltage 1 min - Common value - Across the isolating distance Rated short-time withstand current - 3-sec duration - 1-sec duration - peak Rated short-circuit making current Internal fault current in accordance with IEC 60298 Electrical endurance Mechanical endurance Protection index - Leak-proof tank - Mechanism -...

Open the catalog to page 7

Document non contractuel - notice n° 1020438D Ensto Novexia Miettisen Katu 2, P.O. Box 77 Ensto Oy Ensio SAS 210, rue Léon Jouhaux - BP FIN-06101 Porvoo, Finland 10446 FR - 69656 Villefranche-sur-Saône cedex ensto@ensto.com Tél. : 33 (0)4 74 65 www.ensto.com 61 61 Fax : 33 (0)4 74 62 96 57 E mail : infos.novexia@ensto.com www.ensto.fr

Open the catalog to page 8