ECO
ECO
The document introduces the manual gas flare ECO by Ennox Biogas Technology GmbH, designed as a cost-effective solution for farmers to burn off biogas at agricultural plants. It is suitable for both new installations and retrofitting existing biogas plants.
Specifications
The ECO gas flare operates optimally at a fermenter pressure of 3 mbar, with a recommended minimum operating pressure of 10 mbar. It features a manual ignition system activated by a button and flap mechanism. The flare can be assembled on-site within 1-2 hours, given proper foundation preparation. Models range from ECO 100 to ECO 400, with varying flow rates and thermal power outputs.
Technical Data
- ECO 100: Flowrate 15-100 Nm³/h, Thermal power 100-650 kW, Gas pipe DN 65, Flame pipe Ø 273 mm, Flare height 4000 mm, Weight 120 kg.
- ECO 200: Flowrate 40-200 Nm³/h, Thermal power 260-1300 kW, Gas pipe DN 80, Flame pipe Ø 323 mm, Flare height 4000 mm, Weight 140 kg.
- ECO 250: Flowrate 50-250 Nm³/h, Thermal power 325-1630 kW, Gas pipe DN 80, Flame pipe Ø 400 mm, Flare height 4000 mm, Weight 150 kg.
- ECO 300: Flowrate 60-300 Nm³/h, Thermal power 390-1950 kW, Gas pipe DN 100, Flame pipe Ø 480 mm, Flare height 4000 mm, Weight 180 kg.
- ECO 400: Flowrate 80-400 Nm³/h, Thermal power 520-2600 kW, Gas pipe DN 125, Flame pipe Ø 640 mm, Flare height 4000 mm, Weight 200 kg.
Highlights
- Excellent price/performance ratio.
- Robust construction with simple on-site assembly.
- Gas-contact parts made of stainless steel 1.4571; other components made of stainless steel 1.4301.
- Includes ignition transformer and electrode ignition, with battery ignition available on request.
- Comes with a flame arrester and anchoring.
Catalog excerpts
Digester equipment manuel gas flare ECO The low-price solution for the price-conscious farmer! Robust and compact manual gas flare for burning off biogas at agricultural biogas plants. Perfect for smaller new plants and for retrofitting to existing biogas plants. The operation of the eco gas flare with a fermenter pressure of 3 mbar is possible although a minimum operating pressure of 10 mbar is always recommended. The eco gas flare ignites at the press of a button plus simultaneous actuation of the manual flap. To end the firing cycle, the manual flap is closed again. Eco 100 – 400 is supplied as a complete kit and can be quickly assembled on site according to the assembly instructions and installed. With appropriate preparation (foundations), the flare is ready for use after 1 – 2h of construction. Expansion to automatic operation is possible – appropriate retrofitting kits are available at short notice. Highlights • Outstanding price/performance ratio • Robust construction and simple assembly on site • Parts in contact with the gas are made of stainless steel 1.4571 • All other components are made of stainless steel 1.4301 • Incl. ignition transformer and electrode ignition – battery ignition on request • Incl. flame arrester, anchoring manuel gas flare ECO technical data Model Thermal power Flame pipe Ø Flare height ennox biogas technology GmbH Neulandstr. 36, A-6971 – Hard, Aust
Open the catalog to page 1All Ennox biogas technology GmbH catalogs and technical brochures
Gas blower RAV1 Page
Sediment trap SET1 Page
NOXtreme1 Page
NOXmatic BM1 Page
NOXmatic / NOXmatic NANO2 Pages
Foam trap FDS1 Page
Gas dome GAD1 Page
Manholes MHR / MHL / MHL 22 Pages
Gas chill dryer GCD1 Page
Ceramic fine filter CFP1 Page
Gravel filter GRF1 Page
Condensate pot COP1 Page
Spraying unit PSD1 Page
Inspection window IW1 Page
- Liquid filter
- Drying system
- Filter with cartridge
- Pressure separator filter
- Centrifugal blower
- Single-stage blower
- Stainless steel pre-filter
- Water pre-filter
- Filtration unit
- Continuous drying system
- Air blast dewatering system
- Basket filter
- Gas separator filter
- Automatic filter
- Automatic drain
- Particulate pre-filter
- Condensate trap
- Flange pre-filter
- Fine pre-filter
- Absorption filtration unit