AMF5.2
2Pages

Mains Failure Controllers (With LCD Graphic Display) ENKO Electronic Control Systems - IZMIR / TURKIYE Automatic Mains Failure Controller for Gen-Sets AMF5.2 is equipped with Graphical AMF5.2 is designed with enhanced applications in mind and equipped LCD Display and provides embedded with all the necessary hardware and software to fulfill this demand. intelligence for Gen-Set control applications, where high integration flexibility and “on-site” system monitoring is required. The unit is equipped with LCD Graphic Display, where user interface is simple and efficient. The user can choose what to display and all the alarm events are described in words. User can select the active display language from the menu. All system parameters can be set very easily. System hardware allows the user to interface with high demanding applications, where high number of peripheral control is required. The system software also carefully designed in order to allow dedicated functions to be characterized for a particular application. Simple logic functions can also be executed on the auxiliary inputs and outputs, hence reducing the number of peripheral components. The controller has built-in multiple communication ports for enhanced interface with external control systems. RS232/485 can be used for onsite system configuration as well as remote control and monitoring of the system while integrated CAN Bus can communicate with engine ECU High performance with friendly user interface... module. The system can also be interfaced with ENKO external i/o expansion modules for applications where specific dedicated hardware Main features:  Full automatic mains failure control functions  Graphical LCD display with white LED backlight  Power control and metering function (KW, KVA, KVAr, KWh, CosΦ)  Fully configurable inputs and outputs  Real time clock, weekly and monthly system programming  Time stamped alarm logging for the last 50 events  6 periodic and 6 motor service timers Powerful program menu for enhanced control applications  Earth current measurement Three analog variables can be measured and controlled and functions  RS232/485 com port with MODBUS/RTU protocol and CAN bus/J1939 interface can be made to operate on these measured analog values. In the standby mode, the unit can also measure and control the engine body temperature. The load can be controlled both manual and automatic, where both MCB and GCB contactors can be controlled from the front Carefully designed front panel can allow single instrument control of The system can be used for dual Gen-Set applications, where one can diesel generator systems. The unit is be selected to be master and allow to control the others as slave units. compatible with Diesel engine pow- AMF5.1 allows remote programming, monitoring and GSM interface with ered Gen-Set applications. any external control system.  Standard TTL port for PC or GSM modem application  Automatic alarm reset (autoacknowledge) function via menu programming  Digital calibration on all analog input ports  INTELLIGENT DESIGN FOR ENHANCED APPLICATIONS  MULTIPLE COMMUNICATION PORT FOR PC AND J1939 INTERFACE  FULL GRAPHICAL LCD DISLPAY FOR EASY READING AND OPTIONAL DISPLAY FORMATS  FULLY CONFIGURABLE AUXILIARY INPUTS AND OUTPUTS AND LOGICAL FUNCTIONS ON I/O PORTS Additional features: Technical specifications: 3 PH TRUE RMS VOLTAGE AND CURRNET FOR GENERATOR AND 3 PH VOLTAGE FOR MAINS AUTOMATIC, MANUAL, TEST AND REMOTE START OPERATION MODES OPTION FOR EXPANSION I/O MODULE CONNECTION FOR MORE I/O PORTS WIDE OPERATING TEMP RANGE (-25°C to +70°C) IP52 PROTECTION CLASS (front panel protection) SELECTION OF DISPLAY LANGUAGE AND DISPLAY PARAMETER FORMAT Operating temperature: Relative humidity: Frequency measurement: Current measurement: Charge alternator excitation current: Measurement accuracy: Phase voltages: ±2% of scale, Frequency: ±0.1Hz 8 configurable inputs 6 configurable outputs (dry contact) 3 Analog inputs Protection class: IP52 (front panel protection)

APPLICATION CONNECTION DIAGRAM Mechanical dimensions Typical connection diagram is AMF5.2 controller plastic housing is shown above. Module can be wired designed according to DIN norms. in many different ways, depending Mechanical dimensions are shown in Plastic housing is made of NORYL wire or single phase concept. (PPO) which provides high tempera- ture resistance and good mechanical configured with ENKO PRO-Link stability. The electrical characteris- software or from the front panel. tics of the housing is excellent. CAN bus port can also be used for The front panel is designed to com-...