Steel Industry Products

Product catalog summary

HI Series - Heavy Industry Buffers
Enidine's HI series buffers are designed to protect crane operators and equipment during material transfer. These buffers are engineered to meet safety standards such as OSHA, AISE, CMAA, DIN, and FEM. They feature a hydraulic damping system and nitrogen-charged piston rod return, capable of decelerating loads with velocities from 15 ft/min to 1000 ft/min. Applications include bridge cranes, trolley platforms, and transportation safety stops.

HDN/HDA Series - Heavy Duty Shock Absorbers
The HDN/HDA series buffers are designed for impact conditions requiring softer deceleration. They offer bore diameters up to 12 inches and stroke lengths up to 60 inches, with various mounting configurations. Applications include cab-operated bridge cranes, ladle transfer cars, and coil upenders/downenders.

Wire Rope Isolators - Shock and Vibration Isolators
Enidine Wire Rope Isolators use stainless steel cable and aluminum alloy bars for effective vibration isolation. They are corrosion-resistant and can support loads up to 3,600 lbs. Applications include isolation of electronic control cabinets and protection of piping from shock and vibration.

Jarret Series - Heavy Duty Shock Absorbers
Jarret shock absorbers use a silicon elastomer for energy absorption, eliminating the need for internal gas or mechanical springs. They offer high reliability and low sensitivity to temperature changes. Applications include rolling mill chock separators and furnace slab bumpers.

Contact Information
Enidine, 7 Centre Drive, Orchard Park, New York 14127, USA. Phone: 716-662-1900, Email: [email protected], Website: www.enidine.com

Catalog excerpts

Steel Industry Products

Open the catalog to page 1

Heavy Industry Buffers Enidine’s HI series buffers safely protect the crane operator and equipment during the transfer of materials and movement of products. These large-bore, high-capacity buffers are individually sized to decelerate moving loads under various conditions. In compliance with industry mandated safety standards, these buffers are engineered to conform with OSHA, AISE, CMAA and other safety specifications such as DIN and FEM. The HI series buffer design incorporates a proven internal hydraulic damping system, coupled with a nitrogen-charged piston rod return. The hydraulic damping...

Open the catalog to page 2

Jarret Series Heavy Duty Shock Absorbers Jarret visco-elastic shock absorbers and springs have been successfully applied in heavy industry for over 40 years. The design utilizes the unique compression and shear characteristics of a specially formulated silicon elastomer that enables the Jarret series to be used as an energy-absorbing shock absorber or as a fluidic spring. Due to the compressive compatibility of the fluid, there is no need for internal gas or mechanical springs to return the piston rod to its original position, providing long, maintenance-free operation. Jarret bumpers provide...

Open the catalog to page 3