Introduction
The ERGOFlow extraction torch by ENGMAR is an innovative solution designed to protect welders by efficiently extracting welding fumes. Manufactured in France, it adheres to European norms EN 21904-1, EN 21904-4, and EN 60974.

Product Benefits

• Extracts up to 98% of fumes, enhancing welder safety.
• Reduces consumables and simplifies assembly.
• Features a new cooling system to minimize part wear.
• Offers excellent extraction capacity with a flexible hose for improved ergonomics.

Design and Ergonomics

• Ergonomic handle with options for a valve or button(s).
• Rotating connector made of heavy-duty steel for better handling.
• Available in several configurations to suit different needs.

Technical Specifications

• Power with CO2: 440A; with Ar/CO2: 380A.
• Duty cycle: 100% at 60%.
• Recommended welding wire diameter: 0.8 - 1.6 mm.
• Minimum flow rate at the nozzle: 85 NM3/H.
• Required pressure at sea level: 101.8 KPA.
• Flow difference between nozzle and connector: 22.2 NM3/H.

Product Specifications

• Slimmer torch design with an extraction nozzle positioned for better accessibility.
• 1.4 m leather hose with a light and flexible polyurethane front part.
• European connector and supplied with a wire guide.
• Available in water-cooled and air-cooled versions with different neck angles and lengths.

Usage and Recommendations

The ERGOFlow 420A MIG/MAG torch is designed for high-intensity continuous welding, offering protection from hazardous fumes. It is equipped with a rotating connection for improved ergonomics, allowing welding in any position. In pulsed mode, capacities are reduced by 35%.

Contact Information

ENGMAR SAS, ZA La Poste, Impasse du Pré Rond, 69490 ST ROMAIN DE POPEY, FRANCE. Phone: +33 (0)4 74 01 10 10, Email: [email protected]