Temperature and level measurement STEUER-, MESS- UND REGELTECHNIK Housing with Electrical connection: without connector socket * Position electrical connection. See housing with horizontal display position on page 2. Status LEDs Status LEDs Temperature unit Temperature actual value display Level actual value display Level unit Hotline +49 (0)7389 90920 - eMail [email protected] Ueberarbeitet durch Herrlingeram 19.02.2007

Temperature and level measurement STEUER-, MESS- UND REGELTECHNIK Housing with Electrical connection: without connector socket Position electrical connection. Hotline +49 (0)7389 90920 - eMail [email protected]

Temperature and level measurement STEUER-, MESS- UND REGELTECHNIK Technical data Electrical connection: Sliding tube: Float switch: Operating display: Fault display: Setting range: Measurement range: Operating temperature: Protection rating: Aluminium, colour grey RAL 7001. Plug M12 8-pin with switching outputs and analog outputs. Others possible on request. 1/2" aluminium. Others possible on request. MS dia. 8mm Others possible on request. Actual value displays: Two 4-digit LEDs. Red: Temperature, green: Level. Units display: With changeover facility, two each for temperature and level. Standard...

Temperature and level measurement STEUER-, MESS- UND REGELTECHNIK High-side switch High-side switch High-side switch High-side switch Hysteresis function Window function Fno = Window function n.o. contact Fnc = Window function n.c. contact Hotline +49 (0)7389 90920 - eMail [email protected] Ueberarbeitet durch Herrlingeram 19.02.2007

Temperature and level measurement STEUER-, MESS- UND REGELTECHNIK Electrical connection without connector sockets M12, 8-pln, position E, display vertical AS05 M12, 8-pln, position C, display horizontal AS10 1/2" Aluminium rotatable, position C, display vertical BE04 3/4" Aluminium rotatable, position C, display vertical BE05 1/2" Aluminium rotatable, position E, display BE19 3/4" Aluminium rotatable, position E, display BE20 Sensor length L RH 01 - Tube brass, dia.8mm RH 02 - Tube stainless steel, dia.8mm Length In mm according to customer specification in NBR, cylinder, 017,5x25 with centre...