Technical Features The Easylock ELxBxG-112 clamping module positions and clamps workpieces or fixtures with a repeat accuracy of less than 5 μm. EASYLOCK systems lock through spring forces the clamping pin in rest position. A safety system guarantee. ELxBHG-112 can be opened hydraulically, ELxBPG-112 pneumatically. This zero point system is in hardened steel (ELABxG-112), or treated stainless steel (ELIBxG-112). The thickness of this module has been reduced to gain more height. The unit can be equipped with a blow-out system (-S), an unlocking control system (-C), or an indexing system (-I). The set screws, their cover caps, the seals and the indexing pin are delivered with the module. The respective pulling devices are: TELBG-90M10 or M12 pull-stud pin TDELBG-90-M10 or M12 positioning pin TCELBG-90-M10 or M12 centering pin For clamping pins, see pages 26 and 27 P. 22 / EASYLOCK

EASYLOCK Blowing out system selection no. 2 DIMENSIONS AND MOUNTING POSSIBILITIES A-A view B-B view vent hole selection no. 1 blow-out and control option Blowing-out hole (selection no.2) Oil feed canal Oil feed canal control option blow-out option control option blow-out option Technical Features Repeat accuracy Operating pressure for opening Maximum pressure Holding force Weight with set screws

CLAMPING PINS FOR EASYLOCK WITH Ø112 AND Ø90 CLAMPING BALLS depth 3 CLAMPING PINS FOR: ELxBxG-112 ELxBxG-90 FHc screw 2 WAYS TO SCREW THE CLAMPING PINS : Attachement of a M12 screw from below a FHC M10 x 40 screw from above There are 6 different clamping pins, 3 M10 clamping pins, 3 M12 clamping pins Clamping pin TDELBG-90-Mxx only pin housing ø2

EASYLOCK CLAMPING PINS INSTALLATION AND POSITIONING