Technical Features The Easylock ELxBxG-112 clamping module positions and clamps workpieces or fixtures with a repeat accuracy of less than 5 μm. This model for flanging and its system lock through spring forces the clamping pin in rest position - a safety guarantee! ELxBPF-62 is pneumatic and ELxBHF-62 can be opened hydraulically, in hardened steel (ELABxF-62) or treated stainless steel (ELIBxF-62). The unit can be equipped with a blow-out system (-S), an unlocking control system (-C), or an indexing system (-I). The set screws, their cover caps, the seals and the indexing pin are delivered with the module. The respective clamping pins are: TELB-62 – pull-stud pin TDELB-62 - positioning pin TCELB-62 - clamping pin

EASYLOCK blow-out option DIMENSIONS AND MOUNTING POSSIBILITIES 07x1.5 o-ring 03x1.5 o-ring blow-out option power supply Repeat accuracy Operating pressure for opening Maximum pressure Holding force Weight with set screws blow-out option Technical Features

TDELB-62 clamping only for a 01.5 alignment bore FOR EASYLOCK WITH Ø62 CLAMPING BALLS CLAMPING PINS FOR: ELIBxx-62 2 WAYS TO SCREW THE CLAMPING PINS : Attachement of a M6 screw from below a CHc M5 screw from above Housing for a 01.5 alignment bore

EASYLOCK CLAMPING PINS INSTALLATION AND POSITIONING