Easylock ELxBx2-112

Product catalog summary

Technical Specifications
The Easylock ELxBx2-112 clamping module is designed for precise positioning and clamping of workpieces or fixtures, achieving a repeat accuracy of less than 5 μm. The system utilizes spring forces to lock the clamping pin in the rest position, with safety systems ensuring reliability. The ELxBH2-112 model can be opened hydraulically, while the ELxBP2-112 model operates pneumatically. The modules are available in hardened steel (ELABx2-112) or treated stainless steel (ELIBx2-112).

Optional Features
The unit can be equipped with additional systems such as a blow-out system (-S), an unlocking control system (-C), or an indexing system (-I). These features enhance the functionality and adaptability of the clamping module.

Included Components
The module comes with set screws, cover caps, seals, and an indexing pin. Specific clamping pins include the TELB2-112 pull pin, TDELB2-112 positioning pin, and TCELB2-112 centering pin.

Performance Parameters
Both hydraulic and pneumatic models offer a repeat accuracy of 0.005 mm. The hydraulic model operates at an opening pressure of 30 bars with a maximum pressure of 60 bars, while the pneumatic model operates at 8 bars with a maximum of 12 bars. Both models provide a pull-in force of up to 40 kN/50 kN and a holding force of 20 kN for hydraulic and 17 kN for pneumatic models. The weight with set screws is 1.75 kg.

Mounting and Installation
The system offers various mounting possibilities, including options for unlocking control, oil feed canal (radial option), and pneumatic blow-out with four possible selections. The blow-out system is designed to remove chips and dirt from inside the module.

Clamping Pin Accessories
For the EASYLOCK system with clamping balls ELxBP-112, clamping pins can be attached using an M10 screw from below or an FHc M8 screw from above. The TDELB2-112 clamping pin is specifically mentioned for this purpose.

Catalog excerpts

Technical Features The Easylock ELxBx2-112 clamping module positions and clamps workpieces or fixtures with a repeat accuracy of less than 5 μm. EASYLOCK systems lock through spring forces the clamping pin in rest position. A safety system guarantee. ELxBH2-112 can be opened hydraulically and ELxBP2-112 pneumatically. This zero point system is in hardened steel (ELABx2-112), or treated stainless steel (ELIBx2-112). The unit can be equipped with a blow-out system (-S), an unlocking control system (-C), or an indexing system (-I). The set screws, their cover caps, the seals and the indexing pin are delivered with the module. The respective clamping pins are: TELB2-112 pull pin TDELB2-112 positioning pin TCELB2-112 centering pin For clamping pins, see pages 20 and 21 P. 18 / EASYLOCK

Open the catalog to page 1

DIMENSIONS AND MOUNTING POSSIBILITIES A-A view unlocking control Blowing out system for chips and dirt inside blow-out and control option Oil feed canal (radial option) Pneumatic blow-out (housing base option) blow-out option selection no.2 Technical Features blow-out option 4 possible selections selection no. 1 blow-out option selection no.4 Maximum pressure leak control option Repeat accuracy Operating pressure for opening blow-out option selection no.3 Holding force Weight with set screws

Open the catalog to page 2