Catalogs >
Engineering Data >
EASYLOCK ELxBP-112

EASYLOCK ELxBP-112
4Pages

Catalog excerpts

Technical Features The Easylock ELxBP-112 clamping module positions and clamps workpieces or fixtures with a repeat accuracy of less than 5 μm. EASYLOCK systems lock through spring forces the clamping pin in rest position. A safety guarantee ! ELxBP-112 is pneumatic. This zero point system is in hardened steel (ELABP-112), or treated stainless steel (ELIBP-112). The unit can be equipped with a blow-out system (-S), an unlocking control system (-C) and an indexing system (-I). The set screws, and their cover caps, the seals and the indexing pin are delivered with the module. The respective clamping pins are: TELB-112 pull-stud pin TDELB-112 positioning pin TCELB-112 centering pin For clamping pins, see pages 16 and 17 P. 14 / EASYLOCK

Open the catalog to page 1

DIMENSIONS AND MOUNTING POSSIBILITIES A-A view unlocking control blow-out and/ or control option Blowing out hole to be positioned between the fixing screws Oil feed canal blow-out option selection no.4 control option Pneumatic blow-out blow-out option selection no.1 Technical Features Repeat accuracy Operating pressure for opening Maximum pressure blow-out option selection no.3 blow-out option selection no.2 Holding force Weight with set screws

Open the catalog to page 2

CLAMPING PINS FOR EASYLOCK WITH CLAMPING BALLS ELxBP-112 2 WAYS TO SCREW THE CLAMPING PINS : Attachement of a M10 screw from below or a FHc M8 screw from above

Open the catalog to page 3