SPILL PREVENTION page M28 to M34
7Pages

{{requestButtons}}

Catalog excerpts

SPILL PREVENTION page M28 to M34 - 1

Of course prevention is better than cure. But if, despite all good efforts, environmentally hazardous materials leak, you had better be prepared. “grey contents for universal use” SPILL PREVENTION ABSORBTION MATERIALS Not all spilling happens above a retention bin. Machines loose oil, something breaks in a laboratory, a clincher drips or a barrel breaks. That’s the moment for intervention to prevent worse: Laying rolls around the pool as embanking and absorbing the pollution with pads or pillows. “white contents for carbohydrates” 660 litre emergency spill kits, movable. Red for all fluids, yellow only for carbohydrates like lubricating oil, gasoline or diesel oil. The colour shows the application: red for outdoor and yellow for indoor use, if you wish to remove the oil and not the rainwater. Contents: 4 linkable rolls, Ø 200x300, 50 pads 760x760 mm, 6 pillows 460x460 mm (total absorption capacity 470 litre), one drain cover 610x610 mm and 10 waste bags 120 litre. order no. emergency spill kit, red, universal use Absorption materials for carbohydrates (oil, diesel etc.) floats on water and absorbs all pollution. emergency spill kit, yellow, only carbohydrates The situation dictates the absorption material: grey for all fluids, white for oil floating on water. Rolls embank the leakage, pads absorb the fluid. Absorption kits in tow sizes, 170 and 330 litre. For use in for example hangars of chemical warehouses. 170 litre unit: 12 rolls Ø 70x1220 mm, 100 pads 410x510 mm (total absorption capacity 159 litre), 5 transport bags 120 litre. 330 litre unit: 4 rolls Ø 130x3000 mm, 100 pads 410x510 mm (total absorption capacity 212 litre), 5 transport bags 120 litre. order no. dimensions (lxwxh) Saturated absorption material is put into the supplied extra strong waste bags and taken to processing. Drain cover, prevents collateral damage.

Open the catalog to page 1
SPILL PREVENTION page M28 to M34 - 2

The shapes of our absorption materials have a function: rolls are laid around the polluted area, pads are meant for scattered pollution, pillows for taking up volumes like under a leak or in a hole. Our white Ø 200 booms for carbohydrates can even be linked together to embank an oil slick floating on water. SPILL PREVENTION ABSORBTION MATERIALS For small-scale applications we supply standard sets. Below you can find two examples. Whether it concerns garages, hangers, warehouses or ships, we will compile an optimal ‘calamity kit’ for you. We hope you will never need it. In the end we all...

Open the catalog to page 2
SPILL PREVENTION page M28 to M34 - 3

SPILL PREVENTION RETENTION BINS Retention bins, tailor made for the racks in this pallet warehouse. Dependent on the required dimensions and application, we offer you retention bins from stock or custom made solutions. You can choose from the options mentioned below: - Custom made retention bins of welded plastic or sheet material. Perfect for large areas and low sides. See the pictures above and on the side. This is a much cheaper solution compared to building for realising sealed floors. - Custom made retention bins made of polyester, for large volumes and stronger walls. See examples...

Open the catalog to page 3
SPILL PREVENTION page M28 to M34 - 4

SPILL PREVENTION CHEAPER THAN CURE Ask us for the most recent rules on spill prevention, so you can anticipate inspections unconcerned! Spill pallets for barrels. Spill pallets, dimensions for 1, 2, 3 or 4 barrels. Movable with forklift when empty. Tested by the UVL. order no. dimensions (lxwxh) Lattices are either made of galvanised steel, suitable for oils and greases or made of plastic (sometimes with steel core) for acids, bases and soaps. Skewed IBC support for complete draining. Spill pallets for IBC’s. Options: a wide long spill pallet (for 1 or 2 IBC’s) for maximum security and ease...

Open the catalog to page 4
SPILL PREVENTION page M28 to M34 - 5

SPILL PREVENTION ACCESSORIES Careful handling of environmentally dangerous materials asks for more than the use of retention bins. Safe transport, filling up and storing small quantities is important as well. 60 litre barrel support and retention bin. Ideal for example for garages. No-nonsense solution order no. dimensions (lxwxh) support only support and floor (depicted) 200 litre barrel clamp (no. GR F 220). 300 litre bin for general use. order no. Leak proof overpack for safe transport of broken 200 litre barrels. Overpack for 60 litre barrel for storage of a few barrels. Barrel trolley...

Open the catalog to page 5
SPILL PREVENTION page M28 to M34 - 6

Spill shop floor. Working with fluids, keeping the feet dry and protecting the earth/ environment, that’s what it’s about here. Modular units of 1,5 and 0,75 m2 with dimensions adapted to 200 litre barrels linked together form a stable and safe shop floor. They are assessable to 666 kg per m2. order no. Riding your barrels onto the shop floor easier. dimensions (lxwxh) 2 barrel floor, galvanised lattice 2 barrel floor, plastic lattice dimensions (lxwxh) 4 barrel floor, galvanised lattice 4 barrel floor, plastic lattice Stainless steel linking profile. Link several floor elements together to...

Open the catalog to page 6
SPILL PREVENTION page M28 to M34 - 7

SPILL PREVENTION CABINETS AND RACK BINS Safe outdoors storage unit for pallets with barrels. Acid and caustic proof storage cabinet, with 280 litre capacity. Doorframe (1300x1400 mm) more than enough to place a euro pallet with 2 barrel, if necessary equipped with siphons. When empty it can be easily moved with a forklift. order no. dimensions (lxwxh) Laboratory cabinet, 2 shelves. storage unit including lattice for palette with 2 barrels of 200 litre Rack for environmentally hazardous materials. Dimensions suitable for bins listed below. The same cabinet as above but with shelves and...

Open the catalog to page 7

All Engels Manutention et Environnement catalogs and technical brochures