Surface Jet Aerator
3Pages

www.en-found.com International Environmental Solutions Surface Jet Aerator (Aspirating type) ( RA series) Working Principles: The Surface Jet Aerator is horizontal aerator is used in pretreatment for mixing, secondary and tertiary treatment for oxygen transfer and aquaculture aeration. During the propeller rotates to create the negative pressure, the air is drawn into the shaft and dispersed it into the water in a horizontal direction. The air past the propeller and mix with the fluid will establish micro and high velocity bubbles into the water. The Surface Jet Aerator installations can completely or partially mix very large volumes of water at lowest installed power, and provide excellent turndown capabilities The Surface Jet Aerator ranges from to 50 HP and can be mounted on floats, fixed to a bridge or wall etc. It can also be easily installed in fluctuating water level situations. The Surface jet aerator with air blower system supplies air below the water surface and transfers it into a highly mixed horizontal water stream . This efficiently mixes air and water into the lagoon, tank or other basin that requires it. The Surface jet aerator with air blower system produces higher oxygenation efficiencies than standard aerator , and also a greater level of control in your plant through the capability to aerate and mix. High Oxygen Transfer ! The most important factor when selecting an aeration system for WWTP is Oxygen Transfer Efficiency (OTE). For Jet Aerator is better than other aeration systems on OTE. Please view the above “OTE” drawing. Excellence Mixing Function ! The Jet Aerator posses power turbulent, horizontal flow pattern and high velocity stream cause the excellence mixing function. It is easy to keep Bio-Solids suspension , eliminate the mixing blind point ,control odor and high BOD removal rate. Please view the above “Velocity” drawing for reference. Easy Installation! The simple design provides clients easy installation and safe operation in long time. The wall , bridge flexible mounting are available for different installa

eNFound.Com------ www.en-found.com International Environmental Solutions Reliable Operation, Low Maintenance Cost ! Rigidity and durability is assured with stainless steel construction of shaft, propeller housing, mounting flange and diffuser portion of the unit. Very Low maintenance requirements. The recommended periodic visual inspection of the unit and lubrication of bearings.

eNFound.Com------ www.en-found.com International Environmental Solutions ENFOUND ENTERPRISE CO., LTD. Mailing Address: P.O Box 3-129,Mucha, Taipei, Taiwan TEL: +886-2-29365894 FAX: +886-2-89266027 http://www.en-found.com E-mail: info@en-found.com