HIGH TEMPERATURE & STEAM GENERATING HEAT PUMPS
2Pages

HIGH TEMPERATURE & STEAM GENERATING HEAT PUMPS Enertime’s High Temperature (HTHP) and Steam Generating (SGHP) Heat Pumps produce useful heat in industrial processes and district heating networks by valuing industrial waste heat or renewable resources: • Humid air heat recovery • Flue-gas condensation • Geothermal resources • Industrial cooling loop • Direct process cooling • Grey and wastewater CENTRIFUGAL COMPRESSORS VFD LV/MV HEAT SOURCE Low-pressure refrigerant is evaporated, cooling down the heat source. <100°C We help you to optimally integrate our heat pumps in your process in order to reach the following objectives: • Significant reduction in fossil fuel consumption • Reduction of the site’s carbon footprint • Process and energy efficiency improvement Depending on the industry, the use of Heat Pumps brings other benefits, such as water recovery, reduction of auxiliaries consumptions, flue and humid air cleaning, rejects cooling, etc. enertime CONDENSER 90 to 150°C HEAT USE / DISTRICT HEATING NETWORK High pressure refrigerant is condensed and generates high-temperature heat. Our products are adapted to industrial heat applications requiring a high temperature and over 3 MW of heat. With an optimized modular design to meet each project requirements, they are adapted to the specific needs and constraints, while maximizing their performances (COP) and profitability through the following strenghts: • Enertime centrifugal compressors are optimized for the Heat Pumps and project specificities • Steam and pressurized water production up to 150°C • Combined integration with steam compression and heat recovery systems • Special sources (corrosives, fouling, ...) • Location and accessibility constraints 3700 kW Heat Pump on LP Steam, Le Mans, France

ESTIMATIVE HEAT PUMP PERFORMANCES 90°C 110°C 120°C Heat production temperature (condenser outlet) Cold production temperature (evaporator outlet) [°C] 30 30 Robustly thought-out, Enertime’s Heat Pumps minimize as much as possible operating and maintenance constraints. Fully automated, Enertime’s products allow fast start-ups and stops and a remote supervision, with an high availability. Enertime also offers a complete portfolio of tailored services for maintenance and 24/7 remote monitoring. TYPE HEAT OUTPUT SEPARATE GROUPS COLD SOURCE Up to 100°C Steam from 100 to 150°C AND/OR hot and...