Strain Gauge Interface Single Channel Strain Gauge / Load Cell SDI-12 and RS485 Int Strain Gauge Interface Single Channel Strain Gauge / Load Cell SDI-12 and RS485 Interface Card Support for 300 to External bridge c Precision Temper User Programmab SDI-12 & RS485 D Extended SDI-12 A 24 Bit ADC Analog Low Power - Minim Engineering and R Free Applications 2.5 mm Pluggable -1-STRAIN-24-SD85 is an intelligent general purpose strain gauge interface table for direct connection to strain gauges and load cells. The device can be ed to any suitable device supporting the SDI-12 network and is fully ed into the free Keynes Controls Q-LOG Data Display and Recording e.. The card has been has the ability to be No special installatio and sensor cables s front and back of the d has an SDI-12 and RS485 port which are User selectable using industry d configuration commands. -1-STRAIN-24-SD85 is User Programmable and can supply results in both engineering unit format. A precision temperature sensor input is supplied for ions when compensation is required. Connect the NP-1-S possible to the sens IP-65 enclosure is a nsor monitors the bridge excitation during the measurement and nsates automatically for any excitation variation during the data conversion . model EP-1-STRAIN-24_SD85 Load Cell Interface Card Free Applicatio The card is supplied used for Configurati The Q-LOG softwar P-1-STRAIN-24-SD85 PCB can be supplied customised for third party http://keynes-control ions. Contact Keynes Controls for more details. View looking into the Port Pin-out Sensor Input Port Image is for marketing image below.

swiss sensor technology Description The EP-1-STRAIN-24-SD85 is an intelligent general purpose strain gauge interface card suitable for direct connection to strain gauges and load cells. The device can be connected to any suitable device supporting the SDI-12 network and is fully integrated into the free Q-LOG Data Display and Recording Software.. The card has an SDI-12 and RS485 Modbus port which are User selectable using industry standard configuration commands. The EP-1-STRAIN-24-SD85 is User Programmable and can supply results in both raw or engineering unit format. A precision temperature...

Lowbridge Power - Minimi External completio Engineering Engineering and Se Ra Precision Temperature Free Applica swiss sensor technology Free Applications S User Programmable Scalin 2.5Pluggable mm Plugg Part Number : NP-1-STRAIN-24-SD85 Features 2.5 mm T SDI-12 & RS485 Digital Co Extended SDI-12 Address Dimensions A = ALength 7575 mm Figure Dimensions = Length mm BB==24 24 mm mm Figure 1 1 Support for 24 Bit ADC Analogue Inpu External se b Low Power - Minimised The NP-1-STRAIN-24-SD85isisan anintelligent intelligent general strain gauge interface The card been The NP-1-STRAIN-24-SD85 generalpurpose...

swiss sensor technology Strain Gauge Interfa Single Channel Strain Gauge / Load Cell SDI-12 an SDI-12 network The Network figure below demonstrates how to connect multiple EP-1-STRAIN-24-SD85 SDI-12 cards on a SDI-12 digital network. Each card must have a unique ID number assigned (Address) in order to operate correctly. The SDI-12 network uses a simple three wire low speed application. specification the number of sensors to on a SD Figure A below demonstrates how to The connect multiplelimits NP-1-STRAIN-24-SD85 cards 10 The cards support enhanced addressing - so you get additional device address...

swiss sensor technology Technical Specifications Power Supply Input Range +/- 70 mV Other ranges on request 1 x Port, Version 1.03, 1200 B, 7 Data, N Parity, 1 Stop 1 x Port, 1200 B, 7 Data, Even Parity, 1 Stop Bridge exitation Temp Sensor Thermistor Type 3 K EC95 F type material 10K3A1 Betatherm Gauge resistance Gauge factor User defined www.enertec.ch www.enertec.ch

swiss sensor technology ENERTEC ENGINEERING AG Bürglistrasse 29 8400 Winterthur Switzerland Tel. +41 (0)52 202 54 34