SHS-Series, SyncHoist Load Positioning ▼ SHS-Series 4-Point SyncHoist System Accurate Hoisting and Load Positioning Enhancing a Crane’s Capability Synchronous Hoisting Enerpac SyncHoist is a unique crane product for below-the-hook positioning of heavy loads that require precision placement. The SyncHoist system may reduce the number of cranes needed and reduce the costs of multiple picks. Functions • High precision horizontal and vertical load positioning • Pre-programmed positioning, tilting and aligning. • High precision load manoeuvering, vertically and horizontally – using one crane • Reduces the risk of damage from oscillations of wire rope due to crane jogging and sudden starts/stops • Vastly improving worker safety, operating speed and control • Weather conditions play less critical role • PLC-controlled hydraulics turn lifting into high accuracy hoisting and load positioning system • Double-acting push/pull cylinders with load holding valves for added safety in case of hose rupture or coupler damage • Cost reduction compared to conventional load positioning methods. Applications • Positioning of rotor, stator and propeller blades of wind turbines • Positioning of roof sections, concrete elements, steel structures • Positioning of turbines, transformers, fuel rods • Precise machinery loading, mill rod changes, bearing changes • Precise positioning of pipe lines, blow out valves • Positioning and aligning of ship segments prior to assembly. Options for system management & control: • Manual control: system warning functions • Automatic control: fully PLC-monitorized system with programmable functions using touch screen and system warning functions. ▼ Bridge segments are hoisted from the ground, being positioned with a 4-point SyncHoist system with fully monitorized cylinders. ▼ An SyncHoist system used to align steel blocks of the ship’s control tower sections allowing gradual lift ingand positioning of the load.

What is SyncHoist? Enerpac SHS-Series SyncHoist is a hydraulically operated auxiliary attachment for high precision load positioning for cranes . The automatic version with PLC-controlled hydraulic pump monitors and guides the powerful double-acting push-pull cylinders integrated into the lifting points above the load . The SyncHoist system can be used for pre-programmed positioning, tilting and aligning of loads • Patented system • Complete system tested in compliance with Europenan lifting directive and safety requirements SyncHoist improves safety, operating speed and control of load movement...

SHAS-Series, Autonomous SyncHoist System ▼ SHAS 411040WE Autonomous SyncHoist System demonstrated using a load simulation Accurate Hoisting and Load Positioning Enhancing a Crane’s Capability Autonomous SyncHoist System Enerpac Autonomous SyncHoist System is a unique crane product for below-the-hook positioning of heavy loads that require precision placement. The SyncHoist system may reduce the number of cranes needed. Functions • High precision horizontal and vertical load positioning • Pre-programmed positioning, tilting and aligning. • High precision load manoeuvering using one crane • Vastly...

SHAS Series Capacity Per Lifting Point: 110 - 225 ton Maximum Stroke: 1000 - 1500 mm Accuracy Over Full Stroke: ± 1,0 mm a What is SyncHoist? Enerpac SHAS-Series SyncHoist is a hydraulically actuated auxiliary attachment for high precision load positioning for cranes . The autonomous system (SHAS) with integrated PLC-controlled hydraulics, monitors and guides the powerful doubleacting push-pull cylinders which are integrated into the lifting points The SyncHoist system can be used for pre-programmed positioning, tilting and aligning of loads • Complete system in compliance with European lifting...