Catalogs >
ENERPAC >
SFP-Series, Split-Flow Pumps

SFP-Series, Split-Flow Pumps
2Pages

Catalog excerpts

SFP-Series, Split-Flow Pumps ▼ SFP 421SW and SFP 404SW (pressure gauges and retract valves are not shown) Multiple Outlets with Equal Oil Flow Typical Split-Flow Pump Applications Split-Flow pumps distribute an equal amount of hydraulic oil to a maximum of 8 outlets. Smart valve technology allows both controlled lifting and lowering of heavy loads. Pressure compensated flow control This unique feature to our Split-Flow Pumps will ensure both smooth lifting and lowering. Independent of load distribution. • 2, 4, 6 or 8 split-flow outlets • Individual or simultaneous valve operation with advance/hold/retract function • Joystick (manual) controlled or pendant (solenoid) controlled valves • Flow per outlet ranging from 0,32 to 4,2 l/min at 700 bar • For double and single-acting cylinders • Pressure compensated flow control • Adjustable pressure relief valve per circuit • All models include pressure gauges • Reservoir: 20, 40 or 150 litres. ▼ During manufacturing of container units, the Enerpac SFP404SW Split-Flow Pump with 4 outlets provide both lifting and load distribution function. The container units weight between 70 and 120 ton and are complete equipped as full operational shelter for specific applications in power-gen, mining and construction industries for on-site use. For lifting applications Split-Flow Pumps are an efficient and safer alternative than using individual pumps. Where synchronization of maximum 4% is acceptable split-flow pumps are a safe and economical solution. Application examples: • • • • Bridge deck lifting for bearing maintenance Stage lifting in construction and shipbuilding Skidding to move structures and buildings Levelling of constructions like wind turbines. Remote Control Pendant Split Flow pumps with solenoid valves include a remote pendant with selector switches for each individual outlet, allowing single or multiple cylinder operation. Lifting Cylinders For a complete line of Enerpac cylinders, see the Cylinder and Lifting Products in

Open the catalog to page 1

Split-Flow Hydraulic Pumps 3 ◀ SFP-Series with 20 litres reservoir (shown with 2 split-flow outlets) Reservoir Capacity: Split-Flow Outlets: Flow at Rated Pressure: ◀ SFP-Series with 40 litres reservoir (shown with 4 split-flow outlets) MP 0,32 - 4,20 l/min Maximum Operating Pressure: Lifting an unbalanced load? See the Enerpac EVO-Series modular PLC-controlled synchronous lifting systems to control 4, 8 or 12 lifting points. ◀ SFP-Series with 150 litres reservoir (shown with 4 split-flow outlets) A Number Reservoir Oil Flow of Size per Outlet Split-Flow @ 700 bar Outlets (litres) (l/min)...

Open the catalog to page 2