System components Pallet Components i Valves f Power Sources i Linear Cylinders i Work Supports ( Swing clamps f Collet-Lok® products (^) Use genuine Enerpac manifolds, couplers, hoses and tubings to connect your workholding cylinders or fixtures to the hydraulic power source. A-series, Manifolds For multiple hydraulic line connections at one central location directing oil to or from a pressure source. H700-series, Hoses High pressure hydraulic hoses, for demanding applications. Thermoplastic safety hoses for use on all Enerpac pumps and cylinders. C-series, High Flow Couplers High pressure couplers recommended for use with all Enerpac pumps and cylinders. AH, AR-series, Couplers Spee-D® quick disconnect low leakage couplers for easy connection of hydraulic circuits. T-series, Tubing High pressure steel tubing, available in 1,5 m lengths. Manifolds • Easy to connect • Mounting holes on all models Couplers • For more safety: couplers cannot be connected or disconnected while under hydraulic pressure Hydraulic hoses and tubings • Thermo-plastic safety hoses (max. 700 bar) • Four layer design, including two high strength wire braids • High pressure steel tubing for permanent installations. Do not exceed the maximum pressure. Inspect hoses and tubing frequently and replace as required. Number Model A B C D D1 D2 of ports number O Thermoplastic Safety Hoses Model Nr. coupler complete C-604 A-604 Thread size C 3/8" NPTF 3/8" NPTF 1/4" NPTF G 1/4" SAE #4 Note: Thread size AR-650 is 1/4" NPTF, dimension S is 20,6 mm. Use FZ-1055 fitting to connect to 3/8" hose ends. Maximum Pressure Model number Internal diameter External diameter inch 0 1/4"

MB-series Valves Power Sources f Linear Cylinders ( Work Supports f Swing clamps f Collet-Lok® products Single or multiple station manifolds allow installation of VSS and VST-series positive seal control valves or other D03/CETOP 3 valves. Ideal in applications where independent control of multiple cylinders is required. When independent control of multiple cylinders is required • Multi-station manifolds with SAE or CETOP 3 porting - minimizes plumbing • Mounting patterns for: VSS and VST Valves (D03 or CETOP 3); VE Valves (D03 or CETOP 3); VP03 Valves (D03 or CETOP 3); VMMD Valves (D03 or CETOP...

E ) Pernos de montaje de valv. Fj Vis de montage de distrib. Dj Zugstangen 0 Options _ Simplifies valve and accessory mounting TRK-series tie rods • Connects 1 to 8 VP-series valves station high • Provide leak-free sealing valves • G1/4" oil connection WM-10 remote manifold • Allows remote VP-series valve mounting • Adjustable relief valve incorporated • G1/4" oil connection PB-1 porting manifold • Provide 3 auxiliary pressure lines • G1/4" oil connection Tie Rod Kits mount Enerpac VP-series modular valves to the WM-10 manifold and can accommodate one to eight VP-valve stations. Remote manifold...