EP-Series, Posi Lock® Mechanical Pullers ▼ Shown from left to right: EP-206, EP-108 For Safer and Faster Pulling Long Jaws Long Jaws are used to increase the reach and spread of manual pullers. They maintain the same pulling capacity as the standard jaws, but reduce clamping force to 25%. Patented ‘Safety Cage’ jaw retention system Roll threaded shafts for less effort when applying high torque Slim tapered jaws for improved gripping in tight spots Available in 2 and 3 jaw design and inside and outside pulling configuration • More efficient pulling, as one man can do the job where manual pullers often require two operators. Shaft Attachments Shaft protectors and extenders are live centers that fit over the standard puller shaft for tip protection and additional reach. Application Tip Because of the unique safety cage design, Posi Lock® pullers will grip on surfaces where normal pullers would slip off; e.g. tapered bearings. ◀ Positioning an EP-104, 3-jaw puller on the drive pulley of an ele

1 Patented ‘Safety Cage' guides jaws, holding them securely onto the part. 2 Durable forged jaws provide positive grip. 3 Jaw head provides pivot and reaction point for jaws. 4 Pin, for easy jaw removal and replacement. 5 T-handle provides control of the puller jaws. 6 Drive bolt with rolled threads for increased force with reduced input torque. 7 Snap-ring retains cage to drive bolt and provides quick removal for easy service. Maximum Reach: Spread Range: ▼ QUICK SELECTION CHART EXTERNAL PULLERS For quick technical information see next page. IMPORTANT! Always wear Safety Goggles and Gloves while...

2 and 3 Jaw External Puller EP-Series Internal Puller EPPMI-6 ▼ QUICK SELECTION CHART EXTERNAL PULLERS * Both Standard and Long Jaws are included with EPPMI-6.

Shaft Attachments Shaft protectors and extenders are live centers that fit over the standard puller shaft for tip protection and additional reach. Long Jaws Long Jaws are used to increase the reach and spread of pullers. They maintain the same pulling capacity as the standard jaws, but reduce clamping force to 25% of rating. Maximum Reach: Always wear Safety Goggles and Gloves while using pullers.

EPH-Series, Posi Lock® Hydraulic Pullers ▼ EPHR-110 High-Tech Pulling Transport and Store Conveniently stores and transports hydraulic pullers and accessories. Order the EPT-2550 Storage Cart and make your job easier to do! Long Jaws Used to increase the reach and spread of pullers. They maintain the same pulling capacity as the standard jaws, but reduce clamping force to 25%. Patented ‘Safety Cage’ jaw retention system High force hydraulic system for effortless pulling of large components Slim tapered jaws for better gripping in tight spots Available in 2 and 3 jaw design More efficient pulling,...

▼ SETS SELECTION CHART Standard set EPHS models shipped with 230 VAC pump. Maximum Operating Pressure: Components for 115 VAC pumps are available on request. Standard included Standard included Overall Length 1) See next page for details.

▼ RAM POINT SETS SELECTION CHART Fits Puller Set Model Number EPHSeries Ram Point Set 1) Model Number Ram Point Dimensions Diameter x Length (mm) '• Standard included in EPH-Series Posi Lock Pullers. ▼ LIFT PLATE SELECTION CHART Fits Puller Set Model Number * Mounting screws included. Lifting plates are standard included with EPH-Series Pullers. ▼ LONG JAW SELECTION CHART Fits Puller Set Model Number Long Jaws are optional accessories and used for added reach and spread. They have the same load capacity as standard jaws with 25% of the clamping force.

Maximum Reach: 190 - 1778 mm Maximum Operating Pressure: 700 bar • Roller cart with power lift • Hydraulically actuated lift cylinder on cart extends puller from ground to a height of 1,69 m • Adjustable jaw tips • Includes ZE3-Series 230 Volt electric one stage pump with remote pendant for fingertip control of the removal process.