Directional Control Valves Enerpac hydraulic valves are available in a wide variety of models and configurations. Pressure and Flow Control Valves Whatever your requirements… directional control, flow control, or pressure control… you can be sure that Enerpac has the correct valve to match your application exactly. For more hydraulic system control with pressure relief valves, shutoff valves, check valves and sequence valves see our “System Components”. Designed and manufactured for safe operation up to 700 bar, the range of Enerpac valves allows for direct pump mounting, remote mounting, manual or solenoid actuation, and in-line installation, giving you flexible solutions to control your hydraulic system. Valving Help See Basic System Set-Up and Valve Information in our ‘Yellow Pages’.

• Advance/Retract and Advance/Hold/Retract operation of single-and double-acting cylinders and tools • Manual or solenoid operation • Pump mounting will retrofit on most Enerpac pumps • Available “locking” option on VM Series valves for load-holding applications • Standard “locking” feature on VE Series 3-position valves • User adjustable relief valve allows the operator to easily set the working pressure. POWERFUL SOLUTIONS. GLOBAL FORCE. Reliable Control of Single and DoubleActing Cylinders and Tools Valve Operation For remote valve information, see page 112 .

H Adjustable relief valve All valves feature several gauge ports for “system”, A port and B port pressure monitoring . User adjustable relief valves are included on all models to allow the operator to easily set the optimum working pressure for each application VM33 and VE43 valves include “System Check” feature, for more precise pressure holding and improved system control The VM33 has improved porting which provides faster cylinder retraction while motor is running Pump Mounted Directional Control Valves Locking Valves For applications that require positive load holding, VM-Series valves (except...

Remote Manual Directional Control Valves ▼ Shown from left to right: VC-20, VC-4L Remote Control of Single and DoubleActing Cylinders and Tools Locking Valves For applications that require positive load holding, VC-Series valves are available with a pilot-operated check valve. This option provides hydraulic locking of the load until the valve is shifted into the retract position. • Advance/Hold/Retract operation for use with single-acting or doubleacting cylinders and tools. Valve Operation Used with Cylinder Valve Type 3-Way, 3-Position, Tandem Center, Locking 3-Way, 3-Position, Closed Center,...

Directional Control Valves Dimensions © User Adjustable Relief Valve @ Auxiliary Port Maximum Flow Capacity: 17 l/min Maximum Operating Pressure: 700 bar Spring Centred Valve Kits VM and VC-Series manual 3-position valves can be easily converted into spring centred valves . With these retro-fit kits the handle will automatically move into the neutral valve position when released Gauges Minimize the risk of overloading and ensure long, dependable service from your equipment . Refer to the System Components Section for a full range of gauges . a Valving Help See Basic System Set-Up and Valve Information...