System components Pallet Components i Valves f Power Sources i Linear Cylinders i Work Supports ( Swing clamps f Collet-Lok® products (^) Use genuine Enerpac manifolds, couplers, hoses and tubings to connect your workholding cylinders or fixtures to the hydraulic power source. A-series, Manifolds For multiple hydraulic line connections at one central location directing oil to or from a pressure source. H700-series, Hoses High pressure hydraulic hoses, for demanding applications. Thermoplastic safety hoses for use on all Enerpac pumps and cylinders. C-series, High Flow Couplers High pressure couplers recommended for use with all Enerpac pumps and cylinders. AH, AR-series, Couplers Spee-D® quick disconnect low leakage couplers for easy connection of hydraulic circuits. T-series, Tubing High pressure steel tubing, available in 1,5 m lengths. Manifolds • Easy to connect • Mounting holes on all models Couplers • For more safety: couplers cannot be connected or disconnected while under hydraulic pressure Hydraulic hoses and tubings • Thermo-plastic safety hoses (max. 700 bar) • Four layer design, including two high strength wire braids • High pressure steel tubing for permanent installations. A Important Do not exceed the maximum pressure. Inspect hoses and tubing frequently and replace as required. Number Model A B C D D1 D2 E O Thermoplastic Safety Hoses Hose Hose Hose Internal length End one End two diameter Model Number Maximum Pressure bar Max. Max. Model Nr. Model Nr. Model Nr. Thread L S pressure oil flow coupler female male size * Note: Thread size AR-650 is 1/4" NPTF, dimension S is 20,6 mm. Use FZ-1055 fitting to connect to 3/8" hose ends. Maximum Length Model Internal External Pressure number diameter diameter