PRODUCT DATASHEET ENERGIZER NH15-2300 (HR6) Classification: Chemical System: Designation: Nominal Voltage: Rated Capacity: Typical Weight: Typical Volume: Terminals: Jacket: Industry Standard Dimensions mm (inches) Rechargeable Nickel-Metal Hydride (NiMH) ANSI-1.2H2 IEC-HR6 1.2 Volts 2300 mAh at 21°C (70°F) Based on 460 mA (0.2C ) discharge rate 28 grams (0.99 oz.) 8.3 cubic centimeters (0.5 cubic inch) Flat Contact Plastic Internal Resistance: The internal resistance of the cell varies with state of charge, as follows: Cell Charged Cell 1/2 Discharged 30 milliohms 40 milliohms (tolerance of ±20% applies to above values) AC Impedance (no load): The impedance of the charged cell varies with frequency, as follows: Discharge Characteristics Cell Voltage Above values based on AC current set at 1.0 ampere. Value tolerances are ±20%. Charge: Discharge: Storage: Humidity: NOTE: Operating at extreme temperatures, will significantly impact battery cycle life. Operating and Storage Temperatures: To maintain maximum performance, observe the following general guidelines regarding environmental conditions: Impedance (milliohms) (charged cell) 12 Important Notice This data sheet contains typical information specific to products manufactured at the time of its publication. Contents herein do not constitute a warranty and are for reference only.