Electric Diagram Overview
This document provides technical specifications and details for the FIN21 single-phase filter, including mechanical dimensions, connection details, and electric characteristics.

Mechanical Dimensions
The document specifies the cable sizes and torque requirements for both rigid and flexible cables. Rigid cables range from 0.2 to 6 mm², while flexible cables range from 0.2 to 4 mm² (with some specifications allowing up to 0.5 to 4 mm²). The torque required is consistently 0.8 Nm.

Electric Characteristics
The nominal voltage is specified as 0/250 VAC at 50/60 Hz. The phase-to-phase test voltage is 1750 VDC for 2 seconds, and the phase-to-ground test voltage is 2150 VDC for 2 seconds. The climatic class is rated from -40 to +85 °C.

Single Phase Filter Specifications
The document details the typical attenuation for common and differential modes, with rated currents ranging from 3 to 20 A. The capacitance values (Cx and Cy) and inductance (L1) are provided with their respective tolerances. Power loss varies from 1.5 W to 4 W depending on the model.

Mechanical Dimensions and Weight
All models (.003.M to .020.M) share the same mechanical dimensions: A = 65 mm, B = 85 mm, H = 39 mm, N = 11 mm, with a weight of 0.316 kg. They are all housed in case type 1.

Standards and Certifications
The product complies with UL1283 and CSA C22.2 standards and is certified under E215863.