FIN130SP.001.M Three Phase Parallel Filter
3Pages

THREE PHASE PARALLEL FILTERS APPLICATION GUIDE Enerdoor parallel filter series includes three phase and three phase plus neutral products designed to work in a frequency range between 50 kHz to 10 MHz. This series significantly reduces radio frequency interference to below the European Standard limit of 150 kHz. The FIN130SP and 230SP filters have a resonance frequency of 150 kHz and provide a significant interference reduction in the frequency range of 50 kHz to 5 MHz. The FIN730, 735 and 740 filters reduce interference in the frequency range of 30 kHz to 10 MHz. This series offers terminal block connections with screw and DIN rail mounting installation. ELECTRIC CHARACTERISTICS Capacitor dielectric Film polypropylene Capacitor electrodes Vacuum deposited aluminium layers Capacitor construction Extended double side metallized carrier film with internal series connection and metallized film Resistor construction Metallic layer Coating Solvant resistant (UL94 V-l) plastic case with flame retardant (UL94 V-0) epoxy resin sealing Voltage category Nominal voltage at 85° C Max repetitive pulse rise time 650 V/us Max non repetitive pulse rise time 1000 V/us Capacitor dissipation factor <5x104 measured at 1 kHz/25±5°C Insulation resistance >30 GQ between terminals after 1 minute of energisation at 100V/25±5°C THREE PHASE PARALLEL FILTERS

Nominal Voltage 50/60 Hz Nominal Voltage Phase to Ground Test Voltage Phase to Phase Test Voltage C1 Rated Capacitance Rated Resistance Leakage current for phase at 230 V phase to ground 50 Hz / 40°C RESONANCE CIRCUIT RESPONSE RESPONSE TO CURRENT PULSE ELECTRIC DIAGRAM Line Nominal Voltage 50/60 Hz Nominal Voltage Phase to Ground Test Voltage Phase to Phase Test Voltage C1 Rated Capacitance Rated Resistance Leakage current for phase at 230 V phase to ground 50 Hz / 40°C RESONANCE CIRCUIT RESPONSE THREE PHASE PARALLEL FILTERS RESPONSE TO CURRENT PULSE ELECTRIC DIAGRAM

CONNECTION Rigid Cable (mm2) 1-4 THREE PHASE PARALLEL FILTERS